10. Logic Trees#

Logic trees are documented in the OpenQuake manual (section “Defining Logic Trees”). However some features are only mentioned without giving examples (such as applyToBranches) and some recent developments are missing, in particular the extendModel feature. Here we will document both.

10.1. extendModel#

Starting from engine 3.9 it is possible to define logic trees by adding sources to one or more base models. An example will make things clear:

<?xml version="1.0" encoding="UTF-8"?>
<nrml xmlns:gml="http://www.opengis.net/gml"
      xmlns="http://openquake.org/xmlns/nrml/0.5">
  <logicTree logicTreeID="lt1">
    <logicTreeBranchSet uncertaintyType="sourceModel"
                        branchSetID="bs0">
      <logicTreeBranch branchID="A">
        <uncertaintyModel>common1.xml</uncertaintyModel>
        <uncertaintyWeight>0.6</uncertaintyWeight>
      </logicTreeBranch>
      <logicTreeBranch branchID="B">
        <uncertaintyModel>common2.xml</uncertaintyModel>
        <uncertaintyWeight>0.4</uncertaintyWeight>
      </logicTreeBranch>
    </logicTreeBranchSet>
    <logicTreeBranchSet uncertaintyType="extendModel" branchSetID="bs1">
      <logicTreeBranch branchID="C">
        <uncertaintyModel>extra1.xml</uncertaintyModel>
        <uncertaintyWeight>0.6</uncertaintyWeight>
      </logicTreeBranch>
      <logicTreeBranch branchID="D">
        <uncertaintyModel>extra2.xml</uncertaintyModel>
        <uncertaintyWeight>0.2</uncertaintyWeight>
      </logicTreeBranch>
      <logicTreeBranch branchID="E">
        <uncertaintyModel>extra3.xml</uncertaintyModel>
        <uncertaintyWeight>0.2</uncertaintyWeight>
      </logicTreeBranch>
    </logicTreeBranchSet>
  </logicTree>
</nrml>

In this example there are two base source models, named commom1.xml and common2.xml and three possibile extensions extra1.xml, extra2.xml and extra3.xml. The engine will generate six effective source models by extending first common1.xml and then common2.xml with extra1.xml, then with extra2.xml and then with extra3.xml respectively. Notice that extra1.xml, extra2.xml and extra3.xml can be different versions of the same sources with different parameters or geometries, so extendModel can be used to implement correlated uncertainties.

Since engine 3.15 it is possible to describe logic trees as python lists (one list for each branchset) and to programmatically generate the realizations by using a simplified logic tree implementation in hazardlib. This is extremely useful. For instance, the logic tree above would be written as follows:

>>> from openquake.hazardlib.lt import build
>>> logictree = build(
...     ['sourceModel', [], ['A', 'common1.xml', 0.6],
...                         ['B', 'common2.xml', 0.4]],
...     ['extendModel', [], ['C', 'extra1.xml', 0.6],
...                         ['D', 'extra2.xml', 0.2],
...                         ['E', 'extra3.xml', 0.2]])

and the 6 possible paths can be extracted as follows:

>>> logictree.get_all_paths()  # 2 x 3 paths
['AC', 'AD', 'AE', 'BC', 'BD', 'BE']

The empty square brackets means that the branchset should be applied to all branches in the previous branchset and correspond to the applyToBranches tag in the XML version of the logic tree. If applyToBranches is missing the logic tree is multiplicative and the total number of paths can be obtained simply by multiplying the number of paths in each branchset. When applyToBranches is used the logic tree becomes additive and the total number of paths can be obtained by summing the number of paths in the different subtrees. For instance, let us extend the previous example by adding another extendModel branchset and by using applyToBranches:

<?xml version="1.0" encoding="UTF-8"?>
<nrml xmlns:gml="http://www.opengis.net/gml"
      xmlns="http://openquake.org/xmlns/nrml/0.4">
  <logicTree logicTreeID="lt1">
    <logicTreeBranchSet uncertaintyType="sourceModel"
                        branchSetID="bs0">
      <logicTreeBranch branchID="A">
        <uncertaintyModel>common1.xml</uncertaintyModel>
        <uncertaintyWeight>0.6</uncertaintyWeight>
      </logicTreeBranch>
      <logicTreeBranch branchID="B">
        <uncertaintyModel>common2.xml</uncertaintyModel>
        <uncertaintyWeight>0.4</uncertaintyWeight>
      </logicTreeBranch>
    </logicTreeBranchSet>
    <logicTreeBranchSet uncertaintyType="extendModel" branchSetID="bs1"
                        applyToBranches="A">
      <logicTreeBranch branchID="C">
        <uncertaintyModel>extra1.xml</uncertaintyModel>
        <uncertaintyWeight>0.6</uncertaintyWeight>
      </logicTreeBranch>
      <logicTreeBranch branchID="D">
        <uncertaintyModel>extra2.xml</uncertaintyModel>
        <uncertaintyWeight>0.2</uncertaintyWeight>
      </logicTreeBranch>
      <logicTreeBranch branchID="E">
        <uncertaintyModel>extra3.xml</uncertaintyModel>
        <uncertaintyWeight>0.2</uncertaintyWeight>
      </logicTreeBranch>
    </logicTreeBranchSet>
    <logicTreeBranchSet uncertaintyType="extendModel" branchSetID="bs2"
                        applyToBranches="B">
      <logicTreeBranch branchID="F">
        <uncertaintyModel>extra4.xml</uncertaintyModel>
        <uncertaintyWeight>0.6</uncertaintyWeight>
      </logicTreeBranch>
      <logicTreeBranch branchID="G">
        <uncertaintyModel>extra5.xml</uncertaintyModel>
        <uncertaintyWeight>0.4</uncertaintyWeight>
      </logicTreeBranch>
    </logicTreeBranchSet>
  </logicTree>
</nrml>

In this case only 3 + 2 = 5 paths are considered. You can see which are the combinations by building the logic tree:

>>> logictree = build(
...     ['sourceModel', [], ['A', 'common1.xml', 0.6],
...                         ['B', 'common2.xml', 0.4]],
...     ['extendModel', ['A'], ['C', 'extra1.xml', 0.6],
...                            ['D', 'extra2.xml', 0.2],
...                            ['E', 'extra3.xml', 0.2]],
...     ['extendModel', ['B'], ['F', 'extra4.xml', 0.6],
...                            ['G', 'extra5.xml', 0.4]])
>>> logictree.get_all_paths()  # 3 + 2 paths
['AC.', 'AD.', 'AE..', 'BF.', 'BG.']

applyToBranches can be used in different ways. For instance you can attach the second extendModel to everything and get 8 paths:

>>> logictree = build(
...     ['sourceModel', [], ['A', 'common1.xml', 0.6],
...                         ['B', 'common2.xml', 0.4]],
...     ['extendModel', ['A'], ['C', 'extra1.xml', 0.6],
...                            ['D', 'extra2.xml', 0.2],
...                            ['E', 'extra3.xml', 0.2]],
...     ['extendModel', [], ['F', 'extra4.xml', 0.6],
...                         ['G', 'extra5.xml', 0.4]])
>>> logictree.get_all_paths()  # 3 * 2 + 2 paths
['ACF', 'ACG', 'ADF', 'ADG', 'AEF', 'AEG', 'B.F', 'B.G']

The complete realizations can be obtained by not specifying applyToSources:

>>> logictree = build(
...     ['sourceModel', [], ['A', 'common1.xml', 0.6],
...                         ['B', 'common2.xml', 0.4]],
...     ['extendModel', [], ['C', 'extra1.xml', 0.6],
...                         ['D', 'extra2.xml', 0.2],
...                         ['E', 'extra3.xml', 0.2]],
...     ['extendModel', [], ['F', 'extra4.xml', 0.6],
...                         ['G', 'extra5.xml', 0.4]])
>>> logictree.get_all_paths() # 12 paths
['ACF', 'ACG', 'ADF', 'ADG', 'AEF', 'AEG', 'BCF', 'BCG', 'BDF', 'BDG', 'BEF', 'BEG']

10.2. The logic tree demo#

As another example we will consider the demo LogicTreeCase2ClassicalPSHA in the engine distribution; the logic tree has the following structure:

>>> lt = build(
...    ['sourceModel', [], ['b11', 'source_model.xml', .333]],
...    ['abGRAbsolute', [], ['b21', '4.6 1.1', .333],
...                         ['b22', '4.5 1.0', .333],
...                         ['b23', '4.4 0.9', .334]],
...    ['abGRAbsolute', [], ['b31', '3.3 1.0', .333],
...                         ['b32', '3.2 0.9', .333],
...                         ['b33', '3.1 0.0', .334]],
...    ['maxMagGRAbsolute', [], ['b41', 7.0, .333],
...                             ['b42', 7.3, .333],
...                             ['b43', 7.6, .334]],
...    ['maxMagGRAbsolute', [], ['b51', 7.5, .333],
...                             ['b52', 7.8, .333],
...                             ['b53', 8.0, .334]],
...    ['Active Shallow Crust', [], ['c11', 'BA08', .5],
...                                 ['c12', 'CY12', .5]],
...    ['Stable Continental Crust', [], ['c21', 'TA02', .5],
...                                     ['c22', 'CA03', .5]])

Since the demo is using full enumeration there are 1*3*3*3*3*2*2 = 324 realizations in total that you can build as follows:

>>> import numpy
>>> paths = numpy.array(lt.get_all_paths())
>>> for row in paths.reshape(36, 9):
...      print(' '.join(row))
AADGJMO AADGJMP AADGJNO AADGJNP AADGKMO AADGKMP AADGKNO AADGKNP AADGLMO
AADGLMP AADGLNO AADGLNP AADHJMO AADHJMP AADHJNO AADHJNP AADHKMO AADHKMP
AADHKNO AADHKNP AADHLMO AADHLMP AADHLNO AADHLNP AADIJMO AADIJMP AADIJNO
AADIJNP AADIKMO AADIKMP AADIKNO AADIKNP AADILMO AADILMP AADILNO AADILNP
AAEGJMO AAEGJMP AAEGJNO AAEGJNP AAEGKMO AAEGKMP AAEGKNO AAEGKNP AAEGLMO
AAEGLMP AAEGLNO AAEGLNP AAEHJMO AAEHJMP AAEHJNO AAEHJNP AAEHKMO AAEHKMP
AAEHKNO AAEHKNP AAEHLMO AAEHLMP AAEHLNO AAEHLNP AAEIJMO AAEIJMP AAEIJNO
AAEIJNP AAEIKMO AAEIKMP AAEIKNO AAEIKNP AAEILMO AAEILMP AAEILNO AAEILNP
AAFGJMO AAFGJMP AAFGJNO AAFGJNP AAFGKMO AAFGKMP AAFGKNO AAFGKNP AAFGLMO
AAFGLMP AAFGLNO AAFGLNP AAFHJMO AAFHJMP AAFHJNO AAFHJNP AAFHKMO AAFHKMP
AAFHKNO AAFHKNP AAFHLMO AAFHLMP AAFHLNO AAFHLNP AAFIJMO AAFIJMP AAFIJNO
AAFIJNP AAFIKMO AAFIKMP AAFIKNO AAFIKNP AAFILMO AAFILMP AAFILNO AAFILNP
ABDGJMO ABDGJMP ABDGJNO ABDGJNP ABDGKMO ABDGKMP ABDGKNO ABDGKNP ABDGLMO
ABDGLMP ABDGLNO ABDGLNP ABDHJMO ABDHJMP ABDHJNO ABDHJNP ABDHKMO ABDHKMP
ABDHKNO ABDHKNP ABDHLMO ABDHLMP ABDHLNO ABDHLNP ABDIJMO ABDIJMP ABDIJNO
ABDIJNP ABDIKMO ABDIKMP ABDIKNO ABDIKNP ABDILMO ABDILMP ABDILNO ABDILNP
ABEGJMO ABEGJMP ABEGJNO ABEGJNP ABEGKMO ABEGKMP ABEGKNO ABEGKNP ABEGLMO
ABEGLMP ABEGLNO ABEGLNP ABEHJMO ABEHJMP ABEHJNO ABEHJNP ABEHKMO ABEHKMP
ABEHKNO ABEHKNP ABEHLMO ABEHLMP ABEHLNO ABEHLNP ABEIJMO ABEIJMP ABEIJNO
ABEIJNP ABEIKMO ABEIKMP ABEIKNO ABEIKNP ABEILMO ABEILMP ABEILNO ABEILNP
ABFGJMO ABFGJMP ABFGJNO ABFGJNP ABFGKMO ABFGKMP ABFGKNO ABFGKNP ABFGLMO
ABFGLMP ABFGLNO ABFGLNP ABFHJMO ABFHJMP ABFHJNO ABFHJNP ABFHKMO ABFHKMP
ABFHKNO ABFHKNP ABFHLMO ABFHLMP ABFHLNO ABFHLNP ABFIJMO ABFIJMP ABFIJNO
ABFIJNP ABFIKMO ABFIKMP ABFIKNO ABFIKNP ABFILMO ABFILMP ABFILNO ABFILNP
ACDGJMO ACDGJMP ACDGJNO ACDGJNP ACDGKMO ACDGKMP ACDGKNO ACDGKNP ACDGLMO
ACDGLMP ACDGLNO ACDGLNP ACDHJMO ACDHJMP ACDHJNO ACDHJNP ACDHKMO ACDHKMP
ACDHKNO ACDHKNP ACDHLMO ACDHLMP ACDHLNO ACDHLNP ACDIJMO ACDIJMP ACDIJNO
ACDIJNP ACDIKMO ACDIKMP ACDIKNO ACDIKNP ACDILMO ACDILMP ACDILNO ACDILNP
ACEGJMO ACEGJMP ACEGJNO ACEGJNP ACEGKMO ACEGKMP ACEGKNO ACEGKNP ACEGLMO
ACEGLMP ACEGLNO ACEGLNP ACEHJMO ACEHJMP ACEHJNO ACEHJNP ACEHKMO ACEHKMP
ACEHKNO ACEHKNP ACEHLMO ACEHLMP ACEHLNO ACEHLNP ACEIJMO ACEIJMP ACEIJNO
ACEIJNP ACEIKMO ACEIKMP ACEIKNO ACEIKNP ACEILMO ACEILMP ACEILNO ACEILNP
ACFGJMO ACFGJMP ACFGJNO ACFGJNP ACFGKMO ACFGKMP ACFGKNO ACFGKNP ACFGLMO
ACFGLMP ACFGLNO ACFGLNP ACFHJMO ACFHJMP ACFHJNO ACFHJNP ACFHKMO ACFHKMP
ACFHKNO ACFHKNP ACFHLMO ACFHLMP ACFHLNO ACFHLNP ACFIJMO ACFIJMP ACFIJNO
ACFIJNP ACFIKMO ACFIKMP ACFIKNO ACFIKNP ACFILMO ACFILMP ACFILNO ACFILNP

The engine is computing all such realizations; after running the calculations you will see an output called “Realizations”. If you export it, you will get a CSV file with the following structure:

#,,"generated_by='OpenQuake engine 3.13..."
rlz_id,branch_path,weight
0,AAAAA~AA,3.0740926e-03
1,AAAAA~AB,3.0740926e-03
...
322,ACCCC~BA,3.1111853e-03
323,ACCCC~BB,3.1111853e-03

For each realization there is a branch_path string which is split in two parts separated by a tilde. The left part describe the branches of the source model logic tree and the right part the branches of the gmpe logic tree. In past versions of the engine the branch path was using directly the branch IDs, so it was easy to assess the correspondence between each realization and the associated branches.

Unfortunately, we had to remove that direct correspondence in engine 3.11. The reason is that engine is used in situations where the logic tree has billions of billions of billions … of billions potential realizations, with hundreds of branchsets. If you have 100 branchsets and the branch IDs are 10 characters long, each branch path will be 1000 characters long and impossible to display. The compact representation requires only 1-character per branchset instead. It is possible to pass from the compact representation to the original branch IDs by using the command oq show branches:

$ oq show branches
| branch_id | abbrev | uvalue              |
|-----------+--------+---------------------|
| b11       | A0     | source_model.xml    |
| b21       | A1     | 4.60000 1.10000     |
| b22       | B1     | 4.50000 1.00000     |
| b23       | C1     | 4.40000 0.90000     |
| b31       | A2     | 3.30000 1.00000     |
| b32       | B2     | 3.20000 0.90000     |
| b33       | C2     | 3.10000 0.80000     |
| b41       | A3     | 7.00000             |
| b42       | B3     | 7.30000             |
| b43       | C3     | 7.60000             |
| b51       | A4     | 7.50000             |
| b52       | B4     | 7.80000             |
| b53       | C4     | 8.00000             |
| b11       | A0     | [BooreAtkinson2008] |
| b12       | B0     | [ChiouYoungs2008]   |
| b21       | A1     | [ToroEtAl2002]      |
| b22       | B1     | [Campbell2003]      |

The first character of the abbrev specifies the branch number (“A” means the first branch, “B” the second, etc) while the other characters are the branch set number starting from zero. The format works up to 184 branches per branchset, bu using printable UTF8 characters. For instance the realization #322 has the following branch path in compact form:

ACCCC~BA

which will expand to the following abbreviations (considering that fist “A” corresponds to the branchset 0, the first “C” to branchset 1, the second “C” to branchset 2, the third “C” to branchset 3, the fourth “C” to branchset 4, “B” to branchset 0 of the GMPE logic tree and the last “A” to branchset 1 of the GMPE logic tree):

A0 C1 C2 C3 C4 ~ B0 A1

and then, using the correspondence table abbrev->uvalue, to:

"source_model.xml" "4.4 0.9" "3.1 0.8" "7.6" "8.0" ~
"[ChiouYoungs2008]" "[ToroEtAl2002]"

For convenience, the engine provides a simple command to display the content of a realization, given the realization number, thus answering the FAQ:

$ oq show rlz:322
| uncertainty_type         | uvalue            |
|--------------------------+-------------------|
| sourceModel              | source_model.xml  |
| abGRAbsolute             | 4.40000 0.90000   |
| abGRAbsolute             | 3.10000 0.80000   |
| maxMagGRAbsolute         | 7.60000           |
| maxMagGRAbsolute         | 8.00000           |
| Active Shallow Crust     | [ChiouYoungs2008] |
| Stable Continental Crust | [ToroEtAl2002]    |

NB: the commands oq show branches and oq show rlz are new in engine 3.13: they may change in the future and the string representation of the branch path may change too. It has already changed twice in engine 3.11 and engine 3.12. You cannot rely on it across engine versions.

10.3. The concept of effective realizations#

The management of the logic trees is the most complicated thing in the OpenQuake engine. It is important to manage the logic trees in an efficient way, by avoiding redundant computation and storage, otherwise the engine will not be able to cope with large computations. To that aim, it is essential to understand the concept of effective realizations.

The crucial point is that in many calculations it is possible to reduce the full logic tree (the tree of the potential realizations) to a much smaller one (the tree of the effective realizations).

First, it is best to give some terminology.

  1. for each source model in the source model logic tree there is potentially a different GMPE logic tree

  2. the total number of realizations is the sum of the number of realizations of each GMPE logic tree

  3. a GMPE logic tree is trivial if it has no tectonic region types with multiple GMPEs

  4. a GMPE logic tree is simple if it has at most one tectonic region type with multiple GMPEs

  5. a GMPE logic tree is complex if it has more than one tectonic region type with multiple GMPEs.

Here is an example of trivial GMPE logic tree, in its XML input representation:

<?xml version="1.0" encoding="UTF-8"?>
<nrml xmlns:gml="http://www.opengis.net/gml"
     xmlns="http://openquake.org/xmlns/nrml/0.4">
   <logicTree logicTreeID='lt1'>
           <logicTreeBranchSet uncertaintyType="gmpeModel" branchSetID="bs1"
                   applyToTectonicRegionType="active shallow crust">

               <logicTreeBranch branchID="b1">
                   <uncertaintyModel>SadighEtAl1997</uncertaintyModel>
                   <uncertaintyWeight>1.0</uncertaintyWeight>
               </logicTreeBranch>

           </logicTreeBranchSet>
   </logicTree>
</nrml>

The logic tree is trivial since there is a single branch (“b1”) and GMPE (“SadighEtAl1997”) for each tectonic region type (“active shallow crust”). A logic tree with multiple branches can be simple, or even trivial if the tectonic region type with multiple branches is not present in the underlying source model. This is the key to the logic tree reduction concept.

10.4. Reduction of the logic tree#

The simplest case of logic tree reduction is when the actual sources do not span the full range of tectonic region types in the GMPE logic tree file. This happens very often. FOr instance, in the SHARE calculation for Europe the GMPE logic tree potentially contains 1280 realizations coming from 7 different tectonic region types:

Active_Shallow:

4 GMPEs (b1, b2, b3, b4)

Stable_Shallow:

5 GMPEs (b21, b22, b23, b24, b25)

Shield:

2 GMPEs (b31, b32)

Subduction_Interface:

4 GMPEs (b41, b42, b43, b44)

Subduction_InSlab:

4 GMPEs (b51, b52, b53, b54)

Volcanic:

1 GMPE (b61)

Deep:

2 GMPEs (b71, b72)

The number of paths in the logic tree is 4 * 5 * 2 * 4 * 4 * 1 * 2 = 1280, pretty large. We say that there are 1280 potential realizations per source model. However, in most computations, the user will be interested only in a subset of them. For instance, if the sources contributing to your region of interest are only of kind Active_Shallow and Stable_Shallow, you would consider only 4 * 5 = 20 effective realizations instead of 1280. Doing so may improve the computation time and the needed storage by a factor of 1280 / 20 = 64, which is very significant.

Having motivated the need for the concept of effective realizations, let explain how it works in practice. For sake of simplicity let us consider the simplest possible situation, when there are two tectonic region types in the logic tree file, but the engine contains only sources of one tectonic region type. Let us assume that for the first tectonic region type (T1) the GMPE logic tree file contains 3 GMPEs (A, B, C) and that for the second tectonic region type (T2) the GMPE logic tree file contains 2 GMPEs (D, E). The total number of realizations (assuming full enumeration) is

total_num_rlzs = 3 * 2 = 6

The realizations are identified by an ordered pair of GMPEs, one for each tectonic region type. Let’s number the realizations, starting from zero, and let’s identify the logic tree path with the notation <GMPE of first region type>_<GMPE of second region type>:

#

lt_path

0

A_D

1

B_D

2

C_D

3

A_E

4

B_E

5

C_E

Now assume that the source model does not contain sources of tectonic region type T1, or that such sources are filtered away since they are too distant to have an effect: in such a situation we would expect to have only 2 effective realizations corresponding to the GMPEs in the second tectonic region type. The weight of each effective realizations will be three times the weight of a regular representation, since three different paths in the first tectonic region type will produce exactly the same result. It is not important which GMPE was chosen for the first tectonic region type because there are no sources of kind T1. In such a situation there will be 2 effective realizations coming from a total of 6 total realizations. It means that there will be three copies of the outputs, i.e. three identical outputs for each effective realization.

Starting from engine 3.9 the logic tree reduction must be performed manually, by discarding the irrelevant tectonic region types; in this example the user must add in the job.ini a line

discard_trts = Shield, Subduction_Interface, Subduction_InSlab, Volcanic, Deep

If not, multiple copies of the same outputs will appear.

10.5. How to analyze the logic tree of a calculation without running the calculation#

The engine provides some facilities to explore the logic tree of a computation without running it. The command you need is the oq info command.

Let’s assume that you have a zip archive called SHARE.zip containing the SHARE source model, the SHARE source model logic tree file and the SHARE GMPE logic tree file as provided by the SHARE collaboration, as well as a job.ini file. If you run

$ oq info SHARE.zip

all the files will be parsed and the full logic tree of the computation will be generated. This is very fast, it runs in exactly 1 minute on my laptop, which is impressive, since the XML of the SHARE source models is larger than 250 MB. Such speed come with a price: all the sources are parsed, but they are not filtered, so you will get the complete logic tree, not the one used by your computation, which will likely be reduced because filtering will likely remove some tectonic region types.

The output of the info command will start with a CompositionInfo object, which contains information about the composition of the source model. You will get something like this:

<CompositionInfo
b1, area_source_model.xml, trt=[0, 1, 2, 3, 4, 5, 6], weight=0.500: 1280 realization(s)
b2, faults_backg_source_model.xml, trt=[7, 8, 9, 10, 11, 12, 13], weight=0.200: 1280 realization(s)
b3, seifa_model.xml, trt=[14, 15, 16, 17, 18, 19], weight=0.300: 640 realization(s)>

You can read the lines above as follows. The SHARE model is composed by three submodels:

  • area_source_model.xml contains 7 Tectonic Region Types numbered from 0 to 7 and produces 1280 potential realizations;

  • faults_backg_source_model.xml contains 7 Tectonic Region Types numbered from 7 to 13 and produces 1280 potential realizations;

  • seifa_model.xml contains 6 Tectonic Region Types numbered from 14 to 19 and produces 640 potential realizations;

In practice, you want to know if your complete logic tree will be reduced by the filtering, i.e. you want to know the effective realizations, not the potential ones. You can perform that check by using the –report flag. This will generate a report with a name like report_<calc_id>.rst:

$ oq info --report SHARE.zip
...
[2020-04-14 11:11:50 #2493 WARNING] No sources for some TRTs: you should set
discard_trts = Subduction_InSlab, Deep
...
Generated /home/michele/report_2493.rst

If you open that file you will find a lot of useful information about the source model, its composition, the number of sources and ruptures and the effective realizations.

Depending on the location of the points and the maximum distance, one or more submodels could be completely filtered out and could produce zero effective realizations, so the reduction effect could be even stronger.

In any case the warning tells the user what she should do in order to remove the duplication and reduce the calculation only to the effective realizations, i.e. which are the TRTs to discard in the job.ini file.

11. Source Specific Logic Trees#

There are situations in which the hazard model is comprised by a small number of sources, and for each source there is an individual logic tree managing the uncertainty of a few parameters. In such situations we say that we have a Source Specific Logic Tree.

Such situation is esemplified by the demo that you can find in the directory demos/hazard/LogicTreeCase2ClassicalPSHA, which has the following logic tree, in XML form:

As you can see, each branchset has an applyToSources attribute, pointing to one of the two sources in the hazard model, therefore we have a source specific logic tree.

In compact form we can represent the logic tree as the composition of two source specific logic trees with the following branchsets:

src "1": [<abGRAbsolute(3)>, <maxMagGRAbsolute(3)>]
src "2": [<abGRAbsolute(3)>, <maxMagGRAbsolute(3)>]

The (X) notation denotes the number of branches for each branchset and multiplying such numbers we can deduce the size of the full logic tree (ignoring the gsim logic tree for sake of simplificity):

(3 x 3 for src "1") x (3 x 3 for src "2") = 81 realizations

It is possible to see the full logic tree as the product of two source specific logic trees each one with 9 realizations. The interesting thing it that the engine will require storage and computational power proportional to 9 + 9 = 18 basic components and not to the 9 * 9 = 81 final realizations. In general if there are N source specific logic trees, each one generating R_i realizations with i in the range 0..N-1, the number of basic components and final realizations are respectively:

C = sum(R_i)
R = prod(R_i)

In the demo the storage is over 4 times less (18 vs 81); in more complex cases the gain than can be much more impressive. For instance the ZAF model in our mosaic (the national model for South Africa) contains a source specific logic tree with 22 sources that can be decomposed as follows:

In other words, by storing only 186 components we can save enough information to build 24_959_374_950_829_916_160 realizations, with a gain of over 10^17!

11.1. Extracting the hazard curves#

While it is impossible to compute the hazard curves for 24_959_374_950_829_916_160 realizations, it is quite possible to get the source-specific hazard curves. To this end the engine provides a class HcurvesGetter with a method .get_hcurves which is able to retrieve all the curves associated to the realizations of the logic tree associated to a specific source. Here is the usage:

from openquake.commonlib.datastore import read
from openquake.calculators.getters import HcurvesGetter

getter = HcurvesGetter(read(-1))
print(getter.get_hcurves('1', 'PGA'))  # array of shape (Rs, L)

Looking at the source-specific realizations is useful to assess if the logic tree can be collapsed.

12. Logic tree sampling strategies#

Stating from version 3.10, the OpenQuake engine suppports 4 different strategies for sampling the logic tree. They are called, respectively, early_weights, late_weights, early_latin, late_latin. Here we will discuss how they work.

First of all, we must point out that logic tree sampling is controlled by three parameters in the job.ini:

  • number_of_logic_tree_samples (default 0, no sampling)

  • sampling_method (default early_weights)

  • random_seed (default 42)

When sampling is enabled number_of_logic_tree_samples is a positive number, equal to the number of branches to be randomly extracted from full logic tree of the calculation. The precise why the random extraction works depends on the sampling method.

early_weights

With this sampling method, the engine randomly choose branches depending on the weights in the logic tree; having done that, the hazard curve statistics (mean and quantiles) are computed with equal weights.

late_weights

With this sampling method, the engine randomly choose branches ignoring the weights in the logic tree; however, the hazard curve statistics are computed by taking into account the weights.

early_latin

With this sampling method, the engine randomly choose branches depending on the weights in the logic tree by using an hypercube latin sampling; having done that, the hazard curve statistics are computed with equal weights.

late_latin

Wit this sampling method, the engine randomly choose branches ignoring the weights in the logic tree, but still using an hypercube sampling; then, the hazard curve statistics are computed by taking into account the weights.

More precisely, the engine calls something like the function:

openquake.hazardlib.lt.random_sample(
  branchsets, num_samples, seed, sampling_method)

You are invited to play with it; in general the latin sampling produces samples much closer to the expected weights even with few samples. Here in an example with two branchsets with weights [.4, .6] and [.2, .3, .5] respectively.

>>> import collections
>>> from openquake.hazardlib.lt import random_sample
>>> bsets = [[('X', .4), ('Y', .6)], [('A', .2), ('B', .3), ('C', .5)]]

With 100 samples one would expect to get the path XA 8 times, XB 12 times, XC 20 times, YA 12 times, YB 18 times, YC 30 times. Instead we get:

>>> paths = random_sample(bsets, 100, 42, 'early_weights')
>>> collections.Counter(paths)
Counter({'YC': 26, 'XC': 24, 'YB': 17, 'XA': 13, 'YA': 10, 'XB': 10})
>>> paths = random_sample(bsets, 100, 42, 'late_weights')
>>> collections.Counter(paths)
Counter({'XA': 20, 'YA': 18, 'XB': 17, 'XC': 15, 'YB': 15, 'YC': 15})
>>> paths = random_sample(bsets, 100, 42, 'early_latin')
>>> collections.Counter(paths)
Counter({'YC': 31, 'XC': 19, 'YB': 17, 'XB': 13, 'YA': 12, 'XA': 8})
>>> paths = random_sample(bsets, 100, 45, 'late_latin')
>>> collections.Counter(paths)
Counter({'YC': 18, 'XA': 18, 'XC': 16, 'YA': 16, 'XB': 16, 'YB': 16})