Drouet (2015)¶

class
openquake.hazardlib.gsim.drouet_2015_brazil.
DrouetBrazil2015
[source]¶ Implements GMPE developed by S. Drouet unpublished for Brazil based on the method described in Douet & Cotton (2015) BSSA doi: 10.1785/0120140240.

COEFFS
= <openquake.hazardlib.gsim.base.CoeffsTable object>¶ Coefficient tables are constructed from the electronic suplements of the original paper.

DEFINED_FOR_INTENSITY_MEASURE_COMPONENT
= 'Average horizontal'¶ Supported intensity measure component is the geometric mean of attr:~openquake.hazardlib.const.IMC.AVERAGE_HORIZONTAL,

DEFINED_FOR_INTENSITY_MEASURE_TYPES
= set([<class 'openquake.hazardlib.imt.SA'>, <class 'openquake.hazardlib.imt.PGV'>, <class 'openquake.hazardlib.imt.PGA'>])¶ Supported intensity measure types are spectral acceleration, and peak ground acceleration, see table 6, page 1022 (PGA is assumed to be equal to SA at 0.01 s)

DEFINED_FOR_STANDARD_DEVIATION_TYPES
= set(['Total', 'Inter event', 'Intra event'])¶ Supported standard deviation type is only total, see equation 35, page 1021

DEFINED_FOR_TECTONIC_REGION_TYPE
= 'Stable Shallow Crust'¶ Supported tectonic region type is stable continental crust given that the equations have been derived for Eastern North America.

REQUIRES_DISTANCES
= set(['rjb'])¶ Required distance measure is closest distance to rupture, see equation 30 page 1021.

REQUIRES_RUPTURE_PARAMETERS
= set(['mag'])¶ Required rupture parameter is only magnitude, see equation 30 page 1021.

REQUIRES_SITES_PARAMETERS
= set([])¶ No site parameters are needed

get_mean_and_stddevs
(sites, rup, dists, imt, stddev_types)[source]¶ See
superclass method
for spec of input and result values.


class
openquake.hazardlib.gsim.drouet_2015_brazil.
DrouetBrazil2015withDepth
[source]¶ Implements GMPE developed by S. Drouet unpublished for Brazil based on the method described in Douet & Cotton (2015) BSSA doi: 10.1785/0120140240. Model with magnitudedependent depth distribution and depthdependent stress distribution

COEFFS
= <openquake.hazardlib.gsim.base.CoeffsTable object>¶ Coefficient tables are constructed from the electronic supplements of the original paper.

REQUIRES_RUPTURE_PARAMETERS
= set(['hypo_depth', 'mag'])¶ Required rupture parameter is only magnitude, see equation 30 page 1021.
