Nath et al. 2012¶

class
openquake.hazardlib.gsim.nath_2012.
NathEtAl2012Lower
[source]¶ Implements GMPE of Nath et. al (2012) for intraplate margin seismicity in the Shillong Plateau of India at 2545 km deph.
This model is based on stochastic simulation with a mean stress drop of 150 bars.
Verification of mean value data was done by digitizing Figure 11 using http://arohatgi.info/WebPlotDigitizer/app/. Note that this independent verification did not include magnitude dependence or standard deviations.
Reference
Page number citations in this documentation refer to:
Nath, S. K., Thingbaijam, K. K. S., Maiti, S. K., and Nayak, A. (2012). Groundmotion predictions in Shillong region, northeast India. Journal of Seismology, 16(3):475–488.

COEFFS_BEDROCK
= <openquake.hazardlib.gsim.base.CoeffsTable object>¶ Coefficients taken from Table 5, p. 483.

DEFINED_FOR_INTENSITY_MEASURE_COMPONENT
= 'Vertical'¶ In simulations only the vertical component is estimated (see p. 479) and the stochastic dataset is what the GMPE is based on, so this model effectively predicts vertical motions.

DEFINED_FOR_INTENSITY_MEASURE_TYPES
= set([<class 'openquake.hazardlib.imt.PGA'>, <class 'openquake.hazardlib.imt.SA'>, <class 'openquake.hazardlib.imt.PGV'>])¶ Set of
intensity measure types
this GSIM can calculate. A set should contain classes from moduleopenquake.hazardlib.imt
.

DEFINED_FOR_STANDARD_DEVIATION_TYPES
= set(['Total'])¶ The only sigma is reported in the main coefficient table, Table 5 on p. 483, and must be the total standard deviation.

DEFINED_FOR_TECTONIC_REGION_TYPE
= 'Subduction Interface'¶ “studies on microearthquakes indicated that reverse faulting is predominant in the region” (p. 476)

REQUIRES_DISTANCES
= set(['rrup'])¶ It is noted that “r_rup is the faultrupture distance in kilometers” following equation (11) on p. 484.

REQUIRES_RUPTURE_PARAMETERS
= set(['mag'])¶ Sole required rupture parameter is magnitude, since faulting style is not addressed.

REQUIRES_SITES_PARAMETERS
= set([])¶ Required site parameter Vs30 is used to determing the NEHRP site class, and thus to choose site amplification coefficients and site amplification stanard error from Table 5 on p. 208.

get_mean_and_stddevs
(sites, rup, dists, imt, stddev_types)[source]¶ See
superclass method
for specification of input and result values.Implements equation (11) on p. 484:
ln(P) = c1 + c2*M + c3*(10  M)^3 + c4*ln(R + c5*exp(c6*M)


class
openquake.hazardlib.gsim.nath_2012.
NathEtAl2012Upper
[source]¶ Implements GMPE of Nath et. al (2012) for intraplate margin seismicity in the Shillong Plateau of India above 25 km deph.
This model is based on stochastic simulation with a mean stress drop of 40 bars.

COEFFS_UPPER
= <openquake.hazardlib.gsim.base.CoeffsTable object>¶ Coefficients taken from Table 6, p. 485.

get_mean_and_stddevs
(sites, rup, dists, imt, stddev_types)[source]¶ See
superclass method
for specification of input and result values.Implements the correction factor for the upper crust, equation (12) on p. 484:
P' = P x Correction_factor
