openquake.hazardlib.geo package

Surface classes

Geographic primitives and utilities

geodetic

Module openquake.hazardlib.geo.geodetic contains functions for geodetic transformations, optimized for massive calculations.

openquake.hazardlib.geo.geodetic.EARTH_ELEVATION = -8.848

Maximum elevation on Earth in km.

openquake.hazardlib.geo.geodetic.EARTH_RADIUS = 6371.0

Earth radius in km.

openquake.hazardlib.geo.geodetic.azimuth(lons1, lats1, lons2, lats2)[source]

Calculate the azimuth between two points or two collections of points.

Parameters are the same as for geodetic_distance().

Implements an “alternative formula” from http://williams.best.vwh.net/avform.htm#Crs

Returns

Azimuth as an angle between direction to north from first point and direction to the second point measured clockwise in decimal degrees.

openquake.hazardlib.geo.geodetic.distance(lons1, lats1, depths1, lons2, lats2, depths2)[source]

Calculate a distance between two points (or collections of points) considering points’ depth.

Calls geodetic_distance(), finds the “vertical” distance between points by subtracting one depth from another and combine both using Pythagoras theorem.

Returns

Distance in km, a square root of sum of squares of geodetic distance and vertical distance, which is just a difference between depths.

openquake.hazardlib.geo.geodetic.distance_matrix(lons, lats, diameter=12742.0)[source]
Parameters
  • lons – array of m longitudes

  • lats – array of m latitudes

Returns

matrix of (m, m) distances

openquake.hazardlib.geo.geodetic.distance_to_arc(alon, alat, aazimuth, plons, plats)[source]

Calculate a closest distance between a great circle arc and a point (or a collection of points).

Parameters
  • alat (float alon,) – Arc reference point longitude and latitude, in decimal degrees.

  • azimuth – Arc azimuth (an angle between direction to a north and arc in clockwise direction), measured in a reference point, in decimal degrees.

  • plats (float plons,) – Longitudes and latitudes of points to measure distance. Either scalar values or numpy arrays of decimal degrees.

Returns

Distance in km, a scalar value or numpy array depending on plons and plats. A distance is negative if the target point lies on the right hand side of the arc.

Solves a spherical triangle formed by reference point, target point and a projection of target point to a reference great circle arc.

openquake.hazardlib.geo.geodetic.distance_to_semi_arc(alon, alat, aazimuth, plons, plats)[source]

In this method we use a reference system centerd on (alon, alat) and with the y-axis corresponding to aazimuth direction to calculate the minimum distance from a semiarc with generates in (alon, alat).

Parameters are the same as for distance_to_arc().

openquake.hazardlib.geo.geodetic.distances(lon, lat, lons, lats)[source]

Calculate the geodetic distances between one point and a collection of points by using numba. Assume the parameters are in radians.

openquake.hazardlib.geo.geodetic.distances_to_arc(lon, lat, azi, lons, lats)[source]

Calculate the distances between one arc and a collection of points by using numba. Assume the parameters are in degrees.

openquake.hazardlib.geo.geodetic.fast_azimuth(lon, lat, lons, lats)[source]

Calculate the azimuths of a collection of points with respect to a reference point.

openquake.hazardlib.geo.geodetic.fast_point_at(lon, lat, azimuth, distance)[source]

Perform a forward geodetic transformation: find points lying at a given distances from a given point on a great circle arc defined by azimuth.

Parameters
  • lat (lon,) – Coordinates of the reference point, in radians

  • azimuth – An azimuth of a great circle arc of interest measured in a reference point in decimal degrees.

  • distance – Distance to target point in km.

Returns

Array of shape (2, N) with longitudes and latitudes

Implements the same approach as npoints_towards().

openquake.hazardlib.geo.geodetic.fast_spherical_to_cartesian(lons, lats, deps)[source]

Return the position vectors (in Cartesian coordinates) of list of spherical coordinates.

For equations see: http://mathworld.wolfram.com/SphericalCoordinates.html.

Parameters are components of spherical coordinates in a form of scalars, lists or numpy arrays. depths can be None in which case it’s considered zero for all points.

Returns

np.array of 3d vectors representing points’ coordinates in Cartesian space in km. The array has shape lons.shape + (3,). In particular, if lons and lats are scalars the result is a 3D vector and if they are vectors the result is a matrix of shape (N, 3).

See also cartesian_to_spherical().

openquake.hazardlib.geo.geodetic.geodetic_distance(lons1, lats1, lons2, lats2, diameter=12742.0)[source]

Calculate the geodetic distance between two points or two collections of points.

Parameters are coordinates in decimal degrees. They could be scalar float numbers or numpy arrays, in which case they should “broadcast together”.

Implements http://williams.best.vwh.net/avform.htm#Dist

Returns

Distance in km, floating point scalar or numpy array of such.

openquake.hazardlib.geo.geodetic.intervals_between(lon1, lat1, depth1, lon2, lat2, depth2, length)[source]

Find a list of points between two given ones that lie on the same great circle arc and are equally spaced by length km.

Parameters
  • depth1 (float lon1, lat1,) – Coordinates of a point to start placing intervals from. The first point in the resulting list has these coordinates.

  • depth2 (float lon2, lat2,) – Coordinates of the other end of the great circle arc segment to put intervals on. The last resulting point might be closer to the first reference point than the second one or further, since the number of segments is taken as rounded division of length between two reference points and length.

  • length – Required distance between two subsequent resulting points, in km.

Returns

Tuple of three 1d numpy arrays: longitudes, latitudes and depths of resulting points respectively.

Rounds the distance between two reference points with respect to length and calls npoints_towards().

openquake.hazardlib.geo.geodetic.min_distance_to_segment(seglons, seglats, lons, lats)[source]

This function computes the shortest distance to a segment in a 2D reference system.

Parameters
  • seglons – A list or an array of floats specifying the longitude values of the two vertexes delimiting the segment.

  • seglats – A list or an array of floats specifying the latitude values of the two vertexes delimiting the segment.

  • lons – A list or a 1D array of floats specifying the longitude values of the points for which the calculation of the shortest distance is requested.

  • lats – A list or a 1D array of floats specifying the latitude values of the points for which the calculation of the shortest distance is requested.

Returns

An array of the same shape as lons which contains for each point defined by (lons, lats) the shortest distance to the segment. Distances are negative for those points that stay on the ‘left side’ of the segment direction and whose projection lies within the segment edges. For all other points, distance is positive.

openquake.hazardlib.geo.geodetic.min_geodetic_distance(a, b)[source]

Compute the minimum distance between first mesh and each point of the second mesh when both are defined on the earth surface.

Parameters
  • a – a pair of (lons, lats) or an array of cartesian coordinates

  • b – a pair of (lons, lats) or an array of cartesian coordinates

openquake.hazardlib.geo.geodetic.npoints_between(lon1, lat1, depth1, lon2, lat2, depth2, npoints)[source]

Find a list of specified number of points between two given ones that are equally spaced along the great circle arc connecting given points.

Parameters
  • depth1 (float lon1, lat1,) – Coordinates of a point to start from. The first point in a resulting list has these coordinates.

  • depth2 (float lon2, lat2,) – Coordinates of a point to finish at. The last point in a resulting list has these coordinates.

  • npoints – Integer number of points to return. First and last points count, so if there have to be two intervals, npoints should be 3.

Returns

Tuple of three 1d numpy arrays: longitudes, latitudes and depths of resulting points respectively.

Finds distance between two reference points and calls npoints_towards().

openquake.hazardlib.geo.geodetic.npoints_towards(lon, lat, depth, azimuth, hdist, vdist, npoints)[source]

Find a list of specified number of points starting from a given one along a great circle arc with a given azimuth measured in a given point.

Parameters
  • depth (float lon, lat,) – Coordinates of a point to start from. The first point in a resulting list has these coordinates.

  • azimuth – A direction representing a great circle arc together with a reference point.

  • hdist – Horizontal (geodetic) distance from reference point to the last point of the resulting list, in km.

  • vdist – Vertical (depth) distance between reference and the last point, in km.

  • npoints – Integer number of points to return. First and last points count, so if there have to be two intervals, npoints should be 3.

Returns

Tuple of three 1d numpy arrays: longitudes, latitudes and depths of resulting points respectively.

Implements “completely general but more complicated algorithm” from http://williams.best.vwh.net/avform.htm#LL

openquake.hazardlib.geo.geodetic.point_at(lon, lat, azimuth, distance)[source]

Perform a forward geodetic transformation: find a point lying at a given distance from a given one on a great circle arc defined by azimuth.

Parameters
  • lat (float lon,) – Coordinates of a reference point, in decimal degrees.

  • azimuth – An azimuth of a great circle arc of interest measured in a reference point in decimal degrees.

  • distance – Distance to target point in km.

Returns

Tuple of two float numbers: longitude and latitude of a target point in decimal degrees respectively.

Implements the same approach as npoints_towards().

openquake.hazardlib.geo.geodetic.spherical_to_cartesian(lons, lats, depths=None)[source]

Return the position vectors (in Cartesian coordinates) of list of spherical coordinates.

For equations see: http://mathworld.wolfram.com/SphericalCoordinates.html.

Parameters are components of spherical coordinates in a form of scalars, lists or numpy arrays. depths can be None in which case it’s considered zero for all points.

Returns

np.array of 3d vectors representing points’ coordinates in Cartesian space in km. The array has shape lons.shape + (3,). In particular, if lons and lats are scalars the result is a 3D vector and if they are vectors the result is a matrix of shape (N, 3).

See also cartesian_to_spherical().

line

Module openquake.hazardlib.geo.line defines Line.

class openquake.hazardlib.geo.line.Line(points)[source]

Bases: object

This class represents a geographical line, which is basically a sequence of geographical points.

A line is defined by at least two points.

Parameters

points (list of Point instances) – The sequence of points defining this line.

average_azimuth()[source]

Calculate and return weighted average azimuth of all line’s segments in decimal degrees. Uses formula from http://en.wikipedia.org/wiki/Mean_of_circular_quantities >>> from openquake.hazardlib.geo.point import Point as P >>> ‘%.1f’ % Line([P(0, 0), P(1e-5, 1e-5)]).average_azimuth() ‘45.0’ >>> ‘%.1f’ % Line([P(0, 0), P(0, 1e-5), P(1e-5, 1e-5)]).average_azimuth() ‘45.0’ >>> line = Line([P(0, 0), P(-2e-5, 0), P(-2e-5, 1.154e-5)]) >>> ‘%.1f’ % line.average_azimuth() ‘300.0’

flip()[source]

Inverts the order of the points composing the line

classmethod from_vectors(lons, lats, deps=None)[source]

Creates a line from three numpy.ndarray instances containing longitude, latitude and depths values

get_azimuths()[source]

Return the azimuths of all the segments omposing the polyline

get_length() float[source]

Calculate the length of the line as a sum of lengths of all its segments.

Returns

Total length in km.

get_lengths() numpy.ndarray[source]

Calculate a numpy.ndarray instance with the length of the segments composing the polyline.

Returns

Segments length in km.

get_tu(mesh)[source]

Computes the U and T coordinates of the GC2 method for a mesh of points.

Parameters

mesh – An instance of openquake.hazardlib.geo.mesh.Mesh

get_tu_hat()[source]

Return the unit vectors defining the local origin for each segment of the trace.

Parameters
  • sx – The vector with the x coordinates of the trace

  • sy – The vector with the y coordinates of the trace

Returns

Two arrays of size n x 3 (when n is the number of segments composing the trace

get_ui_ti(mesh, uhat, that)[source]

Compute the t and u coordinates. ti and ui have shape (num_segments x num_sites).

horizontal()[source]

Check if this line is horizontal (i.e. all depths of points are equal).

Returns bool

True if this line is horizontal, false otherwise.

keep_corners(delta)[source]

Removes the points where the change in direction is lower than a tolerance value.

Parameters

delta – An angle in decimal degrees

on_surface()[source]

Check if this line is defined on the surface (i.e. all points are on the surfance, depth=0.0).

Returns bool

True if this line is on the surface, false otherwise.

resample(section_length)[source]

Resample this line into sections. The first point in the resampled line corresponds to the first point in the original line. Starting from the first point in the original line, a line segment is defined as the line connecting the last point in the resampled line and the next point in the original line. The line segment is then split into sections of length equal to section_length. The resampled line is obtained by concatenating all sections. The number of sections in a line segment is calculated as follows: round(segment_length / section_length). Note that the resulting line has a length that is an exact multiple of section_length, therefore its length is in general smaller or greater (depending on the rounding) than the length of the original line. For a straight line, the difference between the resulting length and the original length is at maximum half of the section_length. For a curved line, the difference my be larger, because of corners getting cut.

Parameters

section_length (float) – The length of the section, in km.

Returns

A new line resampled into sections based on the given length.

Return type

An instance of Line

resample_to_num_points(num_points)[source]

Resample the line to a specified number of points.

Parameters

num_points – Integer number of points the resulting line should have.

Returns

A new line with that many points as requested.

openquake.hazardlib.geo.line.get_average_azimuth(azimuths, distances) float[source]

Computes the average azimuth.

Parameters
  • azimuths – A numpy.ndarray instance

  • distances – A numpy.ndarray instance

Returns

A float with the mean azimuth in decimal degrees

openquake.hazardlib.geo.line.get_ti_weights(ui, ti, segments_len)[source]

Compute the weights

openquake.hazardlib.geo.line.get_tu(ui, ti, sl, weights)[source]

Compute the T and U quantitities.

Parameters
  • ui – A numpy.ndarray instance of cardinality (num segments x num sites)

  • ti – A numpy.ndarray instance of cardinality (num segments x num sites)

  • sl – A numpy.ndarray instance with the segments’ length

  • weights – A numpy.ndarray instance of cardinality (num segments x num sites)

openquake.hazardlib.geo.line.get_versor(arr)[source]

Returns the versor (i.e. a unit vector) of a vector

mesh

Module openquake.hazardlib.geo.mesh defines classes Mesh and its subclass RectangularMesh.

class openquake.hazardlib.geo.mesh.Mesh(lons, lats, depths=None)[source]

Bases: object

Mesh object represent a collection of points and provides the most efficient way of keeping those collections in memory.

Parameters
  • lons – A numpy array of longitudes. Can be 1D or 2D.

  • lats – Numpy array of latitudes. The array must be of the same shape as lons.

  • depths – Either None, which means that all points the mesh consists of are lying on the earth surface (have zero depth) or numpy array of the same shape as previous two.

Mesh object can also be created from a collection of points, see from_points_list().

DIST_TOLERANCE = 0.005

Tolerance level to be used in various spatial operations when approximation is required – set to 5 meters.

property depths
classmethod from_coords(coords, sort=True)[source]

Create a mesh object from a list of 3D coordinates (by sorting them)

Params coords

list of coordinates

Parameters

sort – flag (default True)

Returns

a Mesh instance

classmethod from_points_list(points)[source]

Create a mesh object from a collection of points.

Parameters

point – List of Point objects.

Returns

An instance of Mesh with one-dimensional arrays of coordinates from points.

get_closest_points(mesh)[source]

Find closest point of this mesh for each point in the other mesh

Returns

Mesh object of the same shape as mesh with closest points from this one at respective indices.

get_convex_hull()[source]

Get a convex polygon object that contains projections of all the points of the mesh.

Returns

Instance of openquake.hazardlib.geo.polygon.Polygon that is a convex hull around all the points in this mesh. If the original mesh had only one point, the resulting polygon has a square shape with a side length of 10 meters. If there were only two points, resulting polygon is a stripe 10 meters wide.

get_distance_matrix()[source]

Compute and return distances between each pairs of points in the mesh.

This method requires that the coordinate arrays are one-dimensional. NB: the depth of the points is ignored

Warning

Because of its quadratic space and time complexity this method is safe to use for meshes of up to several thousand points. For mesh of 10k points it needs ~800 Mb for just the resulting matrix and four times that much for intermediate storage.

Returns

Two-dimensional numpy array, square matrix of distances. The matrix has zeros on main diagonal and positive distances in kilometers on all other cells. That is, value in cell (3, 5) is the distance between mesh’s points 3 and 5 in km, and it is equal to value in cell (5, 3).

Uses openquake.hazardlib.geo.geodetic.geodetic_distance().

get_joyner_boore_distance(mesh)[source]

Compute and return Joyner-Boore distance to each point of mesh. Point’s depth is ignored.

See openquake.hazardlib.geo.surface.base.BaseSurface.get_joyner_boore_distance() for definition of this distance.

Returns

numpy array of distances in km of the same shape as mesh. Distance value is considered to be zero if a point lies inside the polygon enveloping the projection of the mesh or on one of its edges.

get_min_distance(mesh)[source]

Compute and return the minimum distance from the mesh to each point in another mesh.

Returns

numpy array of distances in km of shape (self.size, mesh.size)

Method doesn’t make any assumptions on arrangement of the points in either mesh and instead calculates the distance from each point of this mesh to each point of the target mesh and returns the lowest found for each.

property lats
property lons
property shape

Return the shape of this mesh.

Returns tuple

The shape of this mesh as (rows, columns)

property xyz
Returns

an array of shape (N, 3) with the cartesian coordinates

class openquake.hazardlib.geo.mesh.RectangularMesh(lons, lats, depths=None)[source]

Bases: openquake.hazardlib.geo.mesh.Mesh

A specification of Mesh that requires coordinate numpy-arrays to be two-dimensional.

Rectangular mesh is meant to represent not just an unordered collection of points but rather a sort of table of points, where index of the point in a mesh is related to it’s position with respect to neighbouring points.

classmethod from_points_list(points)[source]

Create a rectangular mesh object from a list of lists of points. Lists in a list are supposed to have the same length.

Parameters

point – List of lists of Point objects.

get_cell_dimensions()[source]

Calculate centroid, width, length and area of each mesh cell.

Returns

Tuple of four elements, each being 2d numpy array. Each array has both dimensions less by one the dimensions of the mesh, since they represent cells, not vertices. Arrays contain the following cell information:

  1. centroids, 3d vectors in a Cartesian space,

  2. length (size along row of points) in km,

  3. width (size along column of points) in km,

  4. area in square km.

get_mean_inclination_and_azimuth()[source]

Calculate weighted average inclination and azimuth of the mesh surface.

Returns

Tuple of two float numbers: inclination angle in a range [0, 90] and azimuth in range [0, 360) (in decimal degrees).

The mesh is triangulated, the inclination and azimuth for each triangle is computed and average values weighted on each triangle’s area are calculated. Azimuth is always defined in a way that inclination angle doesn’t exceed 90 degree.

get_mean_width()[source]

Calculate and return (weighted) mean width (km) of a mesh surface.

The length of each mesh column is computed (summing up the cell widths in a same column), and the mean value (weighted by the mean cell length in each column) is returned.

get_middle_point()[source]

Return the middle point of the mesh.

Returns

An instance of Point.

The middle point is taken from the middle row and a middle column of the mesh if there are odd number of both. Otherwise the geometric mean point of two or four middle points.

triangulate()[source]

Convert mesh points to vectors in Cartesian space.

Returns

Tuple of four elements, each being 2d numpy array of 3d vectors (the same structure and shape as the mesh itself). Those arrays are:

  1. points vectors,

  2. vectors directed from each point (excluding the last column) to the next one in a same row →,

  3. vectors directed from each point (excluding the first row) to the previous one in a same column ↑,

  4. vectors pointing from a bottom left point of each mesh cell to top right one ↗.

So the last three arrays of vectors allow to construct triangles covering the whole mesh.

openquake.hazardlib.geo.mesh.debug_plot(polygons)[source]
openquake.hazardlib.geo.mesh.sqrt(array)[source]
openquake.hazardlib.geo.mesh.surface_to_arrays(surface)[source]
Parameters

surface – a (Multi)Surface object

Returns

a list of S arrays of shape (3, N, M)

nodalplane

Module openquake.hazardlib.geo.nodalplane implements NodalPlane.

class openquake.hazardlib.geo.nodalplane.NP(strike, dip, rake)

Bases: tuple

dip

Alias for field number 1

rake

Alias for field number 2

strike

Alias for field number 0

class openquake.hazardlib.geo.nodalplane.NodalPlane(strike, dip, rake)[source]

Bases: object

Nodal plane represents earthquake rupture orientation and propagation direction.

Parameters
  • strike – Angle between line created by the intersection of rupture plane and the North direction (defined between 0 and 360 degrees).

  • dip – Angle between earth surface and fault plane (defined between 0 and 90 degrees).

  • rake – Angle describing rupture propagation direction (defined between -180 and +180 degrees).

Raises

ValueError – If any of parameters exceeds the definition range.

classmethod check_dip(dip)[source]

Check if dip is in range (0, 90] and raise ValueError otherwise.

classmethod check_rake(rake)[source]

Check if rake is in range (-180, 180] and raise ValueError otherwise.

classmethod check_strike(strike)[source]

Check if strike is in range [0, 360) and raise ValueError otherwise.

point

Module openquake.hazardlib.geo.point defines Point.

class openquake.hazardlib.geo.point.Point(longitude, latitude, depth=0.0)[source]

Bases: object

This class represents a geographical point in terms of longitude, latitude, and depth (with respect to the Earth surface).

Parameters
  • longitude (float) – Point longitude, in decimal degrees.

  • latitude (float) – Point latitude, in decimal degrees.

  • depth (float) – Point depth (default to 0.0), in km. Depth > 0 indicates a point below the earth surface, and depth < 0 above the earth surface.

EQUALITY_DISTANCE = 0.001

The distance between two points for them to be considered equal, in km.

azimuth(point)[source]

Compute the azimuth (in decimal degrees) between this point and the given point.

Parameters

point (Instance of Point) – Destination point.

Returns

The azimuth, value in a range [0, 360).

Return type

float

closer_than(mesh, radius)[source]

Check for proximity of points in the mesh.

Parameters
Returns

Numpy array of boolean values in the same shape as the mesh coordinate arrays with True on indexes of points that are not further than radius km from this point. Function distance() is used to calculate distances to points of the mesh. Points of the mesh that lie exactly radius km away from this point also have True in their indices.

distance(point)[source]

Compute the distance (in km) between this point and the given point.

Distance is calculated using pythagoras theorem, where the hypotenuse is the distance and the other two sides are the horizontal distance (great circle distance) and vertical distance (depth difference between the two locations).

Parameters

point (Instance of Point) – Destination point.

Returns

The distance.

Return type

float

distance_to_mesh(mesh, with_depths=True)[source]

Compute distance (in km) between this point and each point of mesh.

Parameters
  • meshMesh of points to calculate distance to.

  • with_depths – If True (by default), distance is calculated between actual point and the mesh, geodetic distance of projections is combined with vertical distance (difference of depths). If this is set to False, only geodetic distance between projections is calculated.

Returns

Numpy array of floats of the same shape as mesh with distance values in km in respective indices.

equally_spaced_points(point, distance)[source]

Compute the set of points equally spaced between this point and the given point.

Parameters
  • point (Instance of Point) – Destination point.

  • distance (float) – Distance between points (in km).

Returns

The list of equally spaced points.

Return type

list of Point instances

classmethod from_vector(vector)[source]

Create a point object from a 3d vector in Cartesian space.

Parameters

vector – Tuple, list or numpy array of three float numbers representing point coordinates in Cartesian 3d space.

Returns

A Point object created from those coordinates.

on_surface()[source]

Check if this point is defined on the surface (depth is 0.0).

Returns bool

True if this point is on the surface, false otherwise.

point_at(horizontal_distance, vertical_increment, azimuth)[source]

Compute the point with given horizontal, vertical distances and azimuth from this point.

Parameters
  • horizontal_distance (float) – Horizontal distance, in km.

  • vertical_increment (float) – Vertical increment, in km. When positive, the new point has a greater depth. When negative, the new point has a smaller depth.

Returns

The point at the given distances.

Return type

Instance of Point

round(digits=5)[source]
Returns

a new Point with lon, lat, depth rounded to 5 digits

to_polygon(radius)[source]

Create a circular polygon with specified radius centered in the point.

Parameters

radius – Required radius of a new polygon, in km.

Returns

Instance of Polygon that approximates a circle around the point with specified radius.

property wkt2d

Generate WKT (Well-Known Text) to represent this point in 2 dimensions (ignoring depth).

property x

Alias for .longitude

property y

Alias for .latitude

property z

Alias for .depth

polygon

Module openquake.hazardlib.geo.polygon defines Polygon.

class openquake.hazardlib.geo.polygon.Polygon(points)[source]

Bases: object

Polygon objects represent an area on the Earth surface.

Parameters

points – The list of Point objects defining the polygon vertices. The points are connected by great circle arcs in order of appearance. Polygon segment should not cross another polygon segment. At least three points must be defined.

Raises

ValueError – If points contains less than three unique points or if polygon perimeter intersects itself.

property centroid
Returns

the centroid of the underlying 2D polygon

property coords

Coordinates of the polygon as a linear ring, rounded to 5 digits

dilate(dilation)[source]

Extend the polygon to a specified buffer distance.

Note

In extreme cases where dilation of a polygon creates holes, thus resulting in a multi-polygon, we discard the holes and simply return the ‘exterior’ of the shape.

Parameters

dilation – Distance in km to extend polygon borders to.

Returns

New Polygon object with (in general) more vertices and border that is approximately dilation km far (measured perpendicularly to edges and circularly to vertices) from the border of original polygon.

discretize(mesh_spacing)[source]

Get a mesh of uniformly spaced points inside the polygon area with distance of mesh_spacing km between.

Returns

An instance of Mesh that holds the points data. Mesh is created with no depth information (all the points are on the Earth surface).

classmethod from_wkt(wkt_string)[source]

Create a polygon object from a WKT (Well-Known Text) string.

Parameters

wkt_string – A standard WKT polygon string.

Returns

New Polygon object.

get_bbox()[source]

Returns a simple 2D bounding box from the extrema of lons and lats

intersects(mesh)[source]

Check for intersection with each point of the mesh.

Mesh coordinate values are in decimal degrees.

Parameters

meshopenquake.hazardlib.geo.mesh.Mesh instance.

Returns

Numpy array of bool values in the same shapes in the input coordinate arrays with True on indexes of points that lie inside the polygon or on one of its edges and False for points that neither lie inside nor touch the boundary.

property wkt

Generate WKT (Well-Known Text) to represent this polygon.

openquake.hazardlib.geo.polygon.UPSAMPLING_STEP_KM = 100

Polygon upsampling step for long edges, in kilometers. See get_resampled_coordinates().

openquake.hazardlib.geo.polygon.get_resampled_coordinates(lons, lats)[source]

Resample polygon line segments and return the coordinates of the new vertices. This limits distortions when projecting a polygon onto a spherical surface.

Parameters define longitudes and latitudes of a point collection in the form of lists or numpy arrays.

Returns

A tuple of two numpy arrays: longitudes and latitudes of resampled vertices.

utils

Module openquake.hazardlib.geo.utils contains functions that are common to several geographical primitives and some other low-level spatial operations.

exception openquake.hazardlib.geo.utils.BBoxError[source]

Bases: ValueError

Bounding box too large

class openquake.hazardlib.geo.utils.OrthographicProjection(west, east, north, south)[source]

Bases: object

Callable OrthographicProjection object that can perform both forward and reverse projection (converting from longitudes and latitudes to x and y values on 2d-space and vice versa). The call takes three arguments: first two are numpy arrays of longitudes and latitudes or abscissae and ordinates of points to project and the third one is a boolean that allows to choose what operation is requested – is it forward or reverse one. True value given to third positional argument (or keyword argument “reverse”) indicates that the projection of points in 2d space back to earth surface is needed. The default value for “reverse” argument is False, which means forward projection (degrees to kilometers).

Raises ValueError in forward projection mode if any of the target points is further than 90 degree (along the great circle arc) from the projection center.

Parameters are given as floats, representing decimal degrees (first two are longitudes and last two are latitudes). They define a bounding box in a spherical coordinates of the collection of points that is about to be projected. The center point of the projection (coordinates (0, 0) in Cartesian space) is set to the middle point of that bounding box. The resulting projection is defined for spherical coordinates that are not further from the bounding box center than 90 degree on the great circle arc.

The result projection is of type Orthographic. This projection is prone to distance, area and angle distortions everywhere outside of the center point, but still can be used for checking shapes: verifying if line intersects itself (like in line_intersects_itself()) or if point is inside of a polygon (like in openquake.hazardlib.geo.polygon.Polygon.discretize()). It can be also used for measuring distance to an extent of around 700 kilometers (error doesn’t exceed 1 km up until then).

classmethod from_lons_lats(lons, lats)[source]
class openquake.hazardlib.geo.utils.PolygonPlotter(ax)[source]

Bases: object

Add polygons to a given axis object

add(poly, **kw)[source]
set_lim(xs=(), ys=())[source]
exception openquake.hazardlib.geo.utils.SiteAssociationError[source]

Bases: Exception

Raised when there are no sites close enough

class openquake.hazardlib.geo.utils.SphericalBB(west, east, north, south)

Bases: tuple

east

Alias for field number 1

north

Alias for field number 2

south

Alias for field number 3

west

Alias for field number 0

openquake.hazardlib.geo.utils.angular_distance(km, lat=0, lat2=None)[source]

Return the angular distance of two points at the given latitude.

>>> '%.3f' % angular_distance(100, lat=40)
'1.174'
>>> '%.3f' % angular_distance(100, lat=80)
'5.179'
openquake.hazardlib.geo.utils.assoc(objects, sitecol, assoc_dist, mode)[source]

Associate geographic objects to a site collection.

Parameters
  • objects – something with .lons, .lats or [‘lon’] [‘lat’], or a list of lists of objects with a .location attribute (i.e. assets_by_site)

  • assoc_dist – the maximum distance for association

  • mode – if ‘strict’ fail if at least one site is not associated if ‘error’ fail if all sites are not associated

Returns

(filtered site collection, filtered objects)

openquake.hazardlib.geo.utils.assoc_to_polygons(polygons, data, sitecol, mode)[source]

Associate data from a shapefile with polygons to a site collection :param polygons: polygon shape data :param data: rest of the data belonging to the shapes :param sitecol: a (filtered) site collection :param mode: ‘strict’, ‘warn’ or ‘filter’ :returns: filtered site collection, filtered objects, discarded

openquake.hazardlib.geo.utils.bbox2poly(bbox)[source]
Parameters

bbox – a geographic bounding box West-East-North-South

Returns

a list of pairs corrisponding to the bbox polygon

openquake.hazardlib.geo.utils.cartesian_to_spherical(arrayN3)[source]

Return the spherical coordinates for coordinates in Cartesian space.

This function does an opposite to spherical_to_cartesian().

Parameters

arrayN3 – Array of cartesian coordinates of shape (N, 3)

Returns

Array of shape (3, N) representing longitude (decimal degrees), latitude (decimal degrees) and depth (km) in specified order.

openquake.hazardlib.geo.utils.check_extent(lons, lats, msg='')[source]
Parameters
  • lons – an array of longitudes (more than one)

  • lats – an array of latitudes (more than one)

Params msg

message to display in case of too large extent

Returns

(dx, dy, dz) in km (rounded)

openquake.hazardlib.geo.utils.clean_points(points)[source]

Given a list of Point objects, return a new list with adjacent duplicate points removed.

openquake.hazardlib.geo.utils.cross_idl(lon1, lon2, *lons)[source]

Return True if two longitude values define line crossing international date line.

>>> cross_idl(-45, 45)
False
>>> cross_idl(-180, -179)
False
>>> cross_idl(180, 179)
False
>>> cross_idl(45, -45)
False
>>> cross_idl(0, 0)
False
>>> cross_idl(-170, 170)
True
>>> cross_idl(170, -170)
True
>>> cross_idl(-180, 180)
True
openquake.hazardlib.geo.utils.fix_lon(lon)[source]
Returns

a valid longitude in the range -180 <= lon < 180

>>> fix_lon(11)
11
>>> fix_lon(181)
-179
>>> fix_lon(-182)
178
openquake.hazardlib.geo.utils.geohash(lons, lats, length)[source]

Encode a position given in lon, lat into a geohash of the given lenght

>>> arr = geohash(F64([10., 10.]), F64([45., 46.]), length=5)
>>> [row.tobytes() for row in arr]
[b'spzpg', b'u0pje']
openquake.hazardlib.geo.utils.get_bounding_box(obj, maxdist)[source]

Return the dilated bounding box of a geometric object.

Parameters
  • obj – an object with method .get_bounding_box, or with an attribute .polygon or a list of locations

  • maxdist – maximum distance in km

openquake.hazardlib.geo.utils.get_longitudinal_extent(lon1, lon2)[source]

Return the distance between two longitude values as an angular measure. Parameters represent two longitude values in degrees.

Returns

Float, the angle between lon1 and lon2 in degrees. Value is positive if lon2 is on the east from lon1 and negative otherwise. Absolute value of the result doesn’t exceed 180 for valid parameters values.

openquake.hazardlib.geo.utils.get_middle_point(lon1, lat1, lon2, lat2)[source]

Given two points return the point exactly in the middle lying on the same great circle arc.

Parameters are point coordinates in degrees.

Returns

Tuple of longitude and latitude of the point in the middle.

openquake.hazardlib.geo.utils.get_spherical_bounding_box(lons, lats)[source]

Given a collection of points find and return the bounding box, as a pair of longitudes and a pair of latitudes.

Parameters define longitudes and latitudes of a point collection respectively in a form of lists or numpy arrays.

Returns

A tuple of four items. These items represent western, eastern, northern and southern borders of the bounding box respectively. Values are floats in decimal degrees.

Raises

ValueError – If points collection has the longitudinal extent of more than 180 degrees (it is impossible to define a single hemisphere bound to poles that would contain the whole collection).

openquake.hazardlib.geo.utils.line_intersects_itself(lons, lats, closed_shape=False)[source]

Return True if line of points intersects itself. Line with the last point repeating the first one considered intersecting itself.

The line is defined by lists (or numpy arrays) of points’ longitudes and latitudes (depth is not taken into account).

Parameters

closed_shape – If True the line will be checked twice: first time with its original shape and second time with the points sequence being shifted by one point (the last point becomes first, the first turns second and so on). This is useful for checking that the sequence of points defines a valid Polygon.

openquake.hazardlib.geo.utils.min_distance(xyz, xyzs)[source]
Parameters
  • xyz – an array of shape (3,)

  • xyzs – an array of shape (N, 3)

Returns

the minimum euclidean distance between the point and the points

openquake.hazardlib.geo.utils.normalized(vector)[source]

Get unit vector for a given one.

Parameters

vector – Numpy vector as coordinates in Cartesian space, or an array of such.

Returns

Numpy array of the same shape and structure where all vectors are normalized. That is, each coordinate component is divided by its vector’s length.

openquake.hazardlib.geo.utils.plane_fit(points)[source]

This fits an n-dimensional plane to a set of points. See http://stackoverflow.com/questions/12299540/plane-fitting-to-4-or-more-xyz-points

Parameters

points – An instance of :class:~numpy.ndarray. The number of columns must be equal to three.

Returns

A point on the plane and the normal to the plane.

openquake.hazardlib.geo.utils.point_to_polygon_distance(polygon, pxx, pyy)[source]

Calculate the distance to polygon for each point of the collection on the 2d Cartesian plane.

Parameters
  • polygon – Shapely “Polygon” geometry object.

  • pxx – List or numpy array of abscissae values of points to calculate the distance from.

  • pyy – Same structure as pxx, but with ordinate values.

Returns

Numpy array of distances in units of coordinate system. Points that lie inside the polygon have zero distance.

openquake.hazardlib.geo.utils.triangle_area(e1, e2, e3)[source]

Get the area of triangle formed by three vectors.

Parameters are three three-dimensional numpy arrays representing vectors of triangle’s edges in Cartesian space.

Returns

Float number, the area of the triangle in squared units of coordinates, or numpy array of shape of edges with one dimension less.

Uses Heron formula, see http://mathworld.wolfram.com/HeronsFormula.html.

Module contents

Package openquake.hazardlib.geo contains implementations of different geographical primitives, such as Point, Line Polygon and Mesh, as well as different surface implementations and utility class NodalPlane.