Outputs

There are two alternative ways to get results from the OpenQuake-engine: directly through the calculation or by exporting them from the internal OpenQuake engine database once a calculation is completed.

To export outputs directly through the calculation, it is possible to use the flag –exports xml, as shown in the example below:

user@ubuntu:~$ oq engine --run job.ini --exports xml

This will export the results to the results directory specified in the job.ini file.

Exporting results from a hazard calculation

To obtain a list of all hazard calculations that have been previously run (successfully or unsuccessfully), or that are currently running, the following command can be employed:

user@ubuntu:~$ oq engine --list-hazard-calculations

or simply:

user@ubuntu:~$ oq engine --lhc

Which will display a list of hazard calculations as presented below.

user@ubuntu:~$ oq engine --lhc
job_id | status | start_time | description
1 | failed | 2013-03-01 09:49:34 | Classical PSHA
2 | successful | 2013-03-01 09:49:56 | Classical PSHA
3 | failed | 2013-03-01 10:24:04 | Classical PSHA
4 | failed | 2013-03-01 10:28:16 | Classical PSHA
5 | failed | 2013-03-01 10:30:04 | Classical PSHA
6 | successful | 2013-03-01 10:31:53 | Classical PSHA
7 | failed | 2013-03-09 08:15:14 | Classical PSHA
8 | successful | 2013-03-09 08:18:04 | Classical PSHA

Notes on outputs from hazard calculation

The results generated by the OpenQuake-engine are fundamentally of two distinct typologies differentiated by the presence (or absence) of epistemic uncertainty in the PSHA input model.

When epistemic uncertainty is incorporated into the calculation, the OpenQuake-engine calculators (e.g. Classical PSHA, Event Based PSHA, Disaggregation, UHS) produce a set of results (i.e. hazard curves, ground motion fields, disaggregation outputs, UHS, for each logic-tree realisation) which reflects epistemic uncertainties introduced in the PSHA input model. For each logic tree sample, results are computed and stored. Calculation of results statistics (mean, standard deviation, quantiles) are supported by all the calculators.

By default, OpenQuake will export only the statistical results, i.e. mean curves and quantiles. If the user requires the complete results for all realizations, there is a flag to specify, please see the FAQ. Beware that if the logic tree contains a large number of end branches the process of exporting the results from each end Branch can add a significant amount of time - possibly longer than the computation time - and result in a large volume of disk spaced being used. In this case it is best to postprocess the data programmatically. Please contact us and we will be happy to give directions on how to do that in Python.

NOTE: in the literature there are different algorithms for the computation of the quantiles. The OpenQuake engine uses an algorithm based on interpolation which is implemented here:

gem/oq-engine

In particular, the median is computed as the q=0.5 quantile.

Exporting results from a risk calculation

To obtain a list of all risk calculations that have been previously run (successfully or unsuccessfully), or that are currently running, the following command can be employed:

user@ubuntu:~$ oq engine --list-risk-calculations

or simply:

user@ubuntu:~$ oq engine --lrc

Which will display a list of risk calculations as presented below.

job_id |     status |          start_time |     description
     1 |   complete | 2015-12-02 08:50:30 | Scenario damage example
     2 |     failed | 2015-12-03 09:56:17 | Scenario risk example
     3 |   complete | 2015-12-04 10:45:32 | Scenario risk example
     4 |   complete | 2015-12-04 10:48:33 | Classical risk example
     5 |   complete | 2020-07-09 13:47:45 | Event based risk aggregation example

Display list of outputs

To display a list of the outputs from a given job which has completed successfully, the following command can be used:

user@ubuntu:~$ oq engine --list-outputs <calculation_id>

or simply:

user@ubuntu:~$ oq engine --lo <calculation_id>

which will display a list of outputs for the calculation requested, as presented below:

Calculation 5 results:
  id | name
  11 | Aggregate Event Losses
   1 | Aggregate Loss Curves
   2 | Aggregate Loss Curves Statistics
   3 | Aggregate Losses
   4 | Aggregate Losses Statistics
   5 | Average Asset Losses Statistics
  13 | Earthquake Ruptures
   6 | Events
   7 | Full Report
  10 | Input Files
  12 | Realizations
  14 | Source Loss Table
  15 | Total Loss Curves
  16 | Total Loss Curves Statistics
  17 | Total Losses
  18 | Total Losses Statistics

Exporting the outputs

To export all of the calculation outputs in the default file format (csv for most outputs), the following command can be used:

user@ubuntu:~$ oq engine --export-outputs <calculation_id> <output_directory>

or simply:

user@ubuntu:~$ oq engine --eos <calculation_id> <output_directory>

If, instead of exporting all of the outputs from a particular calculation, only particular output files need to be exported, this can be achieved by using the --export-output option and providing the id of the required output:

user@ubuntu:~$ oq engine --export-output <output_id> <output_directory>

or simply:

user@ubuntu:~$ oq engine --eo <output_id> <output_directory>

Hazard Outputs:

• Classical PSHA
• Scenario Hazard
• Event-Based PSHA
• Hazard Disaggregation

Risk Outputs:

• Scenario Damage
  • Scenario damage statistics
  • Scenario consequence statistics
• Scenario Risk
  • Scenario loss statistics
  • Scenario losses by event
• Classical Damage
  • Probabilistic Damage Distribution
• Classical Risk
  • Loss exceedance curves
  • Probabilistic loss maps
  • Stochastic event loss tables
• Event Based Damage and Risk
  • The asset loss table
  • The Probable Maximum Loss (PML) and the loss curves
• Benefit-Cost Ratio
  • Retrofitting benefit/cost ratio maps
• Infrastructure Risk
• Reinsurance

Secondary Peril Outputs:

• Secondary perils