Publications
============

Aki, K., and P. G. Richards (2002). Quantitative Seismology. Sausalito, California: University Science Books.

Chiou, B. S.-J., and R. R. Youngs (2008). “An NGA Model for the Average Horizontal Component of Peak Ground Motion and Response Spectra.” Earthquake Spectra 24: 173–215.

Chiou, Brian S.-J., and Robert R. Youngs (2014). “Update of the Chiou and Youngs NGA Model for the Average Horizontal Component of Peak Ground Motion and Response Spectra.” Earthquake Spectra 30 (3): 1117–53.

Cornell, C. A (1968). “Engineering Seismic Risk Analysis.” Bulletin of the Seismological Society of America 58: 1583–1606.

Engler, D. T., Worden, C. B., Thompson, E. M., & Jaiswal, K. S. (2022). Partitioning Ground Motion Uncertainty When Conditioned on Station Data. Bulletin of the Seismological Society of America, 112(2), 1060–1079. DOI: https://doi.org/10.1785/0120210177.

EPRI, Electric Power Research Institute (2011). “Technical Report: Central and Eastern United States Seismic Source Characterisation for Nuclear Facilities.” Report. EPRI, Palo Alto, CA. U. S. DoE,; U. S. NERC.

Field, E. H., T. H. Jordan, and C. A. Cornell (2003). “OpenSHA - a Developing Community-Modeling Environment for Seismic Hazard Analysis.” Seismological Research Letters 74: 406–19.

Frankel, A (1995). “Mapping Seismic Hazard in the Central and Eastern United States.” Seismological Research Letters 66 (4): 8–21.

McGuire, K. K (1976). “FORTRAN Computer Program for Seismic Risk Analysis.” Open-File report 76-67. United States Department of the Interior, Geological Survey.

Petersen, M. D., A. D. Frankel, S. C. Harmsen, C. S. Mueller, K. M. Haller, R. L. Wheeler, R. L. Wesson, et al (2008). “Documentation for the 2008 Update of the United States National Seismic Hazard Maps.” Open File Report 2008-1128. U.S. Department of the Interior, U.S. Geological Survey.

Schwartz, D. P., and K. J. Coppersmith (1984). “Fault Behaviour and Characteristic Earthquakes: Examples from the Wasatch and San Andreas Fault Zones.” Journal of Geophysical Research 89 (B7): 5681–98.

Strasser, F. O., M. C. Arango, and J. J. Bommer (2010). “Scaling of the Source Dimensions of Interface and Intraslab Subduction-zone Earthquakes with Moment Magnitude.” Seismological Research Letters 81: 941–50.

Thingbaijam, K. K. S., P. M. Mai, and K. Goda (2017). “New Empirical Earthquake Source-Scaling Laws.” Bulletin of the Seismological Society of America 107 (5): 2225–2946. https://doi.org/10.1785/0120170017.

Wells, D. L., and K. J. Coppersmith (1994). “New Empirical Relationships Among Magnitude, Rupture Length, Rupture Width, Rupture Area, and Surface Displacement.” Bulletin of the Seismological Society of America 84 (4): 974–1002.

Woo, G (1996). “Kernel Estimation Methods for Seismic Hazard Area Source Modeling.” Bulletin of the Seismological Society of America 86 (2): 353–62.

Youngs, R. R., and K. J. Coppersmith (1985). “Implications of Fault Slip Rates and Earthquake Recurrence Models to Probabilistic Seismic Hazard Estimates.” Bulletin of the Seismological Society of America 75 (April): 939–64.