Source code for openquake.hazardlib.source.point

# The Hazard Library
# Copyright (C) 2012-2018 GEM Foundation
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU Affero General Public License as
# published by the Free Software Foundation, either version 3 of the
# License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU Affero General Public License for more details.
#
# You should have received a copy of the GNU Affero General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.
"""
Module :mod:`openquake.hazardlib.source.point` defines :class:`PointSource`.
"""
import math
from openquake.baselib.slots import with_slots
from openquake.hazardlib.geo import Point, geodetic
from openquake.hazardlib.geo.surface.planar import PlanarSurface
from openquake.hazardlib.source.base import ParametricSeismicSource
from openquake.hazardlib.source.rupture import ParametricProbabilisticRupture
from openquake.hazardlib.geo.utils import angular_distance, KM_TO_DEGREES


def _get_rupture_dimensions(src, mag, nodal_plane):
    """
    Calculate and return the rupture length and width
    for given magnitude ``mag`` and nodal plane.

    :param src:
        a PointSource, AreaSource or MultiPointSource
    :param mag:
        a magnitude
    :param nodal_plane:
        Instance of :class:`openquake.hazardlib.geo.nodalplane.NodalPlane`.
    :returns:
        Tuple of two items: rupture length in width in km.

    The rupture area is calculated using method
    :meth:`~openquake.hazardlib.scalerel.base.BaseMSR.get_median_area`
    of source's
    magnitude-scaling relationship. In any case the returned
    dimensions multiplication is equal to that value. Than
    the area is decomposed to length and width with respect
    to source's rupture aspect ratio.

    If calculated rupture width being inclined by nodal plane's
    dip angle would not fit in between upper and lower seismogenic
    depth, the rupture width is shrunken to a maximum possible
    and rupture length is extended to preserve the same area.
    """
    area = src.magnitude_scaling_relationship.get_median_area(
        mag, nodal_plane.rake)
    rup_length = math.sqrt(area * src.rupture_aspect_ratio)
    rup_width = area / rup_length
    seismogenic_layer_width = (src.lower_seismogenic_depth
                               - src.upper_seismogenic_depth)
    max_width = (seismogenic_layer_width
                 / math.sin(math.radians(nodal_plane.dip)))
    if rup_width > max_width:
        rup_width = max_width
        rup_length = area / rup_width
    return rup_length, rup_width


[docs]@with_slots class PointSource(ParametricSeismicSource): """ Point source typology represents seismicity on a single geographical location. :param upper_seismogenic_depth: Minimum depth an earthquake rupture can reach, in km. :param lower_seismogenic_depth: Maximum depth an earthquake rupture can reach, in km. :param location: :class:`~openquake.hazardlib.geo.point.Point` object representing the location of the seismic source. :param nodal_plane_distribution: :class:`~openquake.hazardlib.pmf.PMF` object with values that are instances of :class:`openquake.hazardlib.geo.nodalplane.NodalPlane`. Shows the distribution of probability for rupture to have the certain nodal plane. :param hypocenter_distribution: :class:`~openquake.hazardlib.pmf.PMF` with values being float numbers in km representing the depth of the hypocenter. Latitude and longitude of the hypocenter is always set to ones of ``location``. See also :class:`openquake.hazardlib.source.base.ParametricSeismicSource` for description of other parameters. :raises ValueError: If upper seismogenic depth is below lower seismogenic depth, if one or more of hypocenter depth values is shallower than upper seismogenic depth or deeper than lower seismogenic depth. """ _slots_ = ParametricSeismicSource._slots_ + '''upper_seismogenic_depth lower_seismogenic_depth location nodal_plane_distribution hypocenter_distribution '''.split() MODIFICATIONS = set(()) RUPTURE_WEIGHT = 0.1 def __init__(self, source_id, name, tectonic_region_type, mfd, rupture_mesh_spacing, magnitude_scaling_relationship, rupture_aspect_ratio, temporal_occurrence_model, # point-specific parameters upper_seismogenic_depth, lower_seismogenic_depth, location, nodal_plane_distribution, hypocenter_distribution): super().__init__( source_id, name, tectonic_region_type, mfd, rupture_mesh_spacing, magnitude_scaling_relationship, rupture_aspect_ratio, temporal_occurrence_model) if not lower_seismogenic_depth > upper_seismogenic_depth: raise ValueError('lower seismogenic depth must be below ' 'upper seismogenic depth') if not all(upper_seismogenic_depth <= depth <= lower_seismogenic_depth for (prob, depth) in hypocenter_distribution.data): raise ValueError('depths of all hypocenters must be in between ' 'lower and upper seismogenic depths') if not upper_seismogenic_depth > geodetic.EARTH_ELEVATION: raise ValueError( "Upper seismogenic depth must be greater than the " "maximum elevation on Earth's surface (-8.848 km)") self.location = location self.nodal_plane_distribution = nodal_plane_distribution self.hypocenter_distribution = hypocenter_distribution self.upper_seismogenic_depth = upper_seismogenic_depth self.lower_seismogenic_depth = lower_seismogenic_depth self.max_radius = 0 def _get_max_rupture_projection_radius(self): """ Find a maximum radius of a circle on Earth surface enveloping a rupture produced by this source. :returns: Half of maximum rupture's diagonal surface projection. """ if self.max_radius: # already computed return self.max_radius # extract maximum magnitude max_mag, _rate = self.get_annual_occurrence_rates()[-1] for (np_prob, np) in self.nodal_plane_distribution.data: # compute rupture dimensions rup_length, rup_width = _get_rupture_dimensions(self, max_mag, np) # compute rupture width surface projection rup_width = rup_width * math.cos(math.radians(np.dip)) # the projection radius is half of the rupture diagonal radius = math.sqrt(rup_length ** 2 + rup_width ** 2) / 2.0 if radius > self.max_radius: self.max_radius = radius return self.max_radius
[docs] def iter_ruptures(self): """ See :meth: `openquake.hazardlib.source.base.BaseSeismicSource.iter_ruptures`. Generate one rupture for each combination of magnitude, nodal plane and hypocenter depth. """ return self._iter_ruptures_at_location( self.temporal_occurrence_model, self.location)
def _iter_ruptures_at_location(self, temporal_occurrence_model, location, rate_scaling_factor=1): """ The common part of :meth: `openquake.hazardlib.source.point.Point.iter_ruptures` shared between point source and :class:`~openquake.hazardlib.source.area.AreaSource`. :param temporal_occurrence_model: The same object as given to :meth: `openquake.hazardlib.source.base.BaseSeismicSource.iter_ruptures`. :param location: A :class:`~openquake.hazardlib.geo.point.Point` object representing the hypocenter location. In case of :class:`PointSource` it is the one provided to constructor, and for area source the location points are taken from polygon discretization. :param rate_scaling_factor: Positive float number to multiply occurrence rates by. It is used by area source to scale the occurrence rates with respect to number of locations. Point sources use no scaling (``rate_scaling_factor = 1``). """ assert 0 < rate_scaling_factor, rate_scaling_factor for mag, mag_occ_rate in self.get_annual_occurrence_rates(): for np_prob, np in self.nodal_plane_distribution.data: for hc_prob, hc_depth in self.hypocenter_distribution.data: hypocenter = Point(latitude=location.latitude, longitude=location.longitude, depth=hc_depth) occurrence_rate = (mag_occ_rate * np_prob * hc_prob * rate_scaling_factor) surface = self._get_rupture_surface(mag, np, hypocenter) yield ParametricProbabilisticRupture( mag, np.rake, self.tectonic_region_type, hypocenter, surface, occurrence_rate, self.temporal_occurrence_model)
[docs] def count_ruptures(self): """ See :meth: `openquake.hazardlib.source.base.BaseSeismicSource.count_ruptures`. """ return (len(self.get_annual_occurrence_rates()) * len(self.nodal_plane_distribution.data) * len(self.hypocenter_distribution.data))
def _get_rupture_surface(self, mag, nodal_plane, hypocenter): """ Create and return rupture surface object with given properties. :param mag: Magnitude value, used to calculate rupture dimensions, see :meth:`_get_rupture_dimensions`. :param nodal_plane: Instance of :class:`openquake.hazardlib.geo.nodalplane.NodalPlane` describing the rupture orientation. :param hypocenter: Point representing rupture's hypocenter. :returns: Instance of :class:`~openquake.hazardlib.geo.surface.planar.PlanarSurface`. """ assert self.upper_seismogenic_depth <= hypocenter.depth \ and self.lower_seismogenic_depth >= hypocenter.depth rdip = math.radians(nodal_plane.dip) # precalculated azimuth values for horizontal-only and vertical-only # moves from one point to another on the plane defined by strike # and dip: azimuth_right = nodal_plane.strike azimuth_down = (azimuth_right + 90) % 360 azimuth_left = (azimuth_down + 90) % 360 azimuth_up = (azimuth_left + 90) % 360 rup_length, rup_width = _get_rupture_dimensions(self, mag, nodal_plane) # calculate the height of the rupture being projected # on the vertical plane: rup_proj_height = rup_width * math.sin(rdip) # and it's width being projected on the horizontal one: rup_proj_width = rup_width * math.cos(rdip) # half height of the vertical component of rupture width # is the vertical distance between the rupture geometrical # center and it's upper and lower borders: hheight = rup_proj_height / 2. # calculate how much shallower the upper border of the rupture # is than the upper seismogenic depth: vshift = self.upper_seismogenic_depth - hypocenter.depth + hheight # if it is shallower (vshift > 0) than we need to move the rupture # by that value vertically. if vshift < 0: # the top edge is below upper seismogenic depth. now we need # to check that we do not cross the lower border. vshift = self.lower_seismogenic_depth - hypocenter.depth - hheight if vshift > 0: # the bottom edge of the rupture is above the lower sesmogenic # depth. that means that we don't need to move the rupture # as it fits inside seismogenic layer. vshift = 0 # if vshift < 0 than we need to move the rupture up by that value. # now we need to find the position of rupture's geometrical center. # in any case the hypocenter point must lie on the surface, however # the rupture center might be off (below or above) along the dip. rupture_center = hypocenter if vshift != 0: # we need to move the rupture center to make the rupture fit # inside the seismogenic layer. hshift = abs(vshift / math.tan(rdip)) rupture_center = rupture_center.point_at( horizontal_distance=hshift, vertical_increment=vshift, azimuth=(azimuth_up if vshift < 0 else azimuth_down)) # from the rupture center we can now compute the coordinates of the # four coorners by moving along the diagonals of the plane. This seems # to be better then moving along the perimeter, because in this case # errors are accumulated that induce distorsions in the shape with # consequent raise of exceptions when creating PlanarSurface objects # theta is the angle between the diagonal of the surface projection # and the line passing through the rupture center and parallel to the # top and bottom edges. Theta is zero for vertical ruptures (because # rup_proj_width is zero) theta = math.degrees( math.atan((rup_proj_width / 2.) / (rup_length / 2.))) hor_dist = math.sqrt( (rup_length / 2.) ** 2 + (rup_proj_width / 2.) ** 2) left_top = rupture_center.point_at( horizontal_distance=hor_dist, vertical_increment=-rup_proj_height / 2., azimuth=(nodal_plane.strike + 180 + theta) % 360) right_top = rupture_center.point_at( horizontal_distance=hor_dist, vertical_increment=-rup_proj_height / 2., azimuth=(nodal_plane.strike - theta) % 360) left_bottom = rupture_center.point_at( horizontal_distance=hor_dist, vertical_increment=rup_proj_height / 2., azimuth=(nodal_plane.strike + 180 - theta) % 360) right_bottom = rupture_center.point_at( horizontal_distance=hor_dist, vertical_increment=rup_proj_height / 2., azimuth=(nodal_plane.strike + theta) % 360) surface = PlanarSurface( nodal_plane.strike, nodal_plane.dip, left_top, right_top, right_bottom, left_bottom) return surface @property def polygon(self): """ Polygon corresponding to the max_rupture_projection_radius """ radius = self._get_max_rupture_projection_radius() return self.location.to_polygon(radius)
[docs] def get_bounding_box(self, maxdist): """ Bounding box containing all points, enlarged by the maximum distance and the maximum rupture projection radius (upper limit). """ lon = self.location.longitude lat = self.location.latitude maxradius = self._get_max_rupture_projection_radius() a1 = (maxdist + maxradius) * KM_TO_DEGREES a2 = angular_distance(maxdist + maxradius, lat) return lon - a2, lat - a1, lon + a2, lat + a1