# -*- coding: utf-8 -*-
# vim: tabstop=4 shiftwidth=4 softtabstop=4
#
# Copyright (C) 2012-2018 GEM Foundation
#
# OpenQuake is free software: you can redistribute it and/or modify it
# under the terms of the GNU Affero General Public License as published
# by the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# OpenQuake is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU Affero General Public License for more details.
#
# You should have received a copy of the GNU Affero General Public License
# along with OpenQuake. If not, see <http://www.gnu.org/licenses/>.
"""
Module exports :class:`AbrahamsonSilva2008`.
"""
import numpy as np
from openquake.hazardlib.gsim.base import GMPE, CoeffsTable
from openquake.hazardlib import const
from openquake.hazardlib.imt import PGA, PGV, SA
[docs]class AbrahamsonSilva2008(GMPE):
"""
Implements GMPE developed by Norman Abrahamson and Walter Silva and
published as "Summary of the Abrahamson & Silva NGA Ground-Motion
Relations" (2008, Earthquakes Spectra, Volume 24, Number 1, pages 67-97).
This class implements only the equations for mainshock/foreshocks/swarms
type events, that is the aftershock term (4th term in equation 1, page 74)
is set to zero. The constant displacement model (page 80) is also not
implemented (that is equation 1, page 74 is used for all periods and no
correction is applied for periods greater than the constant displacement
period). This class implements also the corrections (for standard
deviation and hanging wall term calculation) as described in:
http://peer.berkeley.edu/products/abrahamson-silva_nga_report_files/
AS08_NGA_errata.pdf
"""
#: Supported tectonic region type is active shallow crust, see paragraph
#: 'Data Set Selection', see page 68.
DEFINED_FOR_TECTONIC_REGION_TYPE = const.TRT.ACTIVE_SHALLOW_CRUST
#: Supported intensity measure types are spectral acceleration, peak
#: ground velocity and peak ground acceleration, see tables 5a and 5b
#: pages 84, 85, respectively.
DEFINED_FOR_INTENSITY_MEASURE_TYPES = set([
PGA,
PGV,
SA
])
#: Supported intensity measure component is orientation-independent
#: average horizontal :attr:`~openquake.hazardlib.const.IMC.GMRotI50`,
#: see abstract, page 67.
DEFINED_FOR_INTENSITY_MEASURE_COMPONENT = const.IMC.GMRotI50
#: Supported standard deviation types are inter-event, intra-event
#: and total, see paragraph "Equations for standard deviations", page 81.
DEFINED_FOR_STANDARD_DEVIATION_TYPES = set([
const.StdDev.TOTAL,
const.StdDev.INTER_EVENT,
const.StdDev.INTRA_EVENT
])
#: Required site parameters are Vs30, Vs30 type (measured or inferred),
#: and Z1.0, see paragraph 'Soil Depth Model', page 79, and table 6,
#: page 86.
REQUIRES_SITES_PARAMETERS = set(('vs30', 'vs30measured', 'z1pt0'))
#: Required rupture parameters are magnitude, rake, dip, ztor, and width
#: (see table 2, page 75)
REQUIRES_RUPTURE_PARAMETERS = set(('mag', 'rake', 'dip', 'ztor', 'width'))
#: Required distance measures are Rrup, Rjb and Rx (see Table 2, page 75).
REQUIRES_DISTANCES = set(('rrup', 'rjb', 'rx'))
[docs] def get_mean_and_stddevs(self, sites, rup, dists, imt, stddev_types):
"""
See :meth:`superclass method
<.base.GroundShakingIntensityModel.get_mean_and_stddevs>`
for spec of input and result values.
"""
# extract dictionaries of coefficients specific to required
# intensity measure type and for PGA
C = self.COEFFS[imt]
C_PGA = self.COEFFS[PGA()]
# compute median pga on rock (vs30=1100), needed for site response
# term calculation
pga1100 = np.exp(self._compute_imt1100(PGA(), sites, rup, dists))
mean = (self._compute_base_term(C, rup, dists) +
self._compute_faulting_style_term(C, rup) +
self._compute_site_response_term(C, imt, sites, pga1100) +
self._compute_hanging_wall_term(C, dists, rup) +
self._compute_top_of_rupture_depth_term(C, rup) +
self._compute_large_distance_term(C, dists, rup) +
self._compute_soil_depth_term(C, imt, sites.z1pt0, sites.vs30))
stddevs = self._get_stddevs(C, C_PGA, pga1100, rup, sites,
stddev_types)
return mean, stddevs
def _compute_base_term(self, C, rup, dists):
"""
Compute and return base model term, that is the first term in equation
1, page 74. The calculation of this term is explained in paragraph
'Base Model', page 75.
"""
c1 = self.CONSTS['c1']
R = np.sqrt(dists.rrup ** 2 + self.CONSTS['c4'] ** 2)
base_term = (C['a1'] +
C['a8'] * ((8.5 - rup.mag) ** 2) +
(C['a2'] + self.CONSTS['a3'] * (rup.mag - c1)) *
np.log(R))
if rup.mag <= c1:
return base_term + self.CONSTS['a4'] * (rup.mag - c1)
else:
return base_term + self.CONSTS['a5'] * (rup.mag - c1)
def _compute_faulting_style_term(self, C, rup):
"""
Compute and return faulting style term, that is the sum of the second
and third terms in equation 1, page 74.
"""
# ranges of rake values for each faulting mechanism are specified in
# table 2, page 75
return (C['a12'] * float(rup.rake > 30 and rup.rake < 150) +
C['a13'] * float(rup.rake > -120 and rup.rake < -60))
def _compute_site_response_term(self, C, imt, sites, pga1100):
"""
Compute and return site response model term, that is the fifth term
in equation 1, page 74.
"""
site_resp_term = np.zeros_like(sites.vs30)
vs30_star, _ = self._compute_vs30_star_factor(imt, sites.vs30)
vlin, c, n = C['VLIN'], self.CONSTS['c'], self.CONSTS['n']
a10, b = C['a10'], C['b']
idx = sites.vs30 < vlin
arg = vs30_star[idx] / vlin
site_resp_term[idx] = (a10 * np.log(arg) -
b * np.log(pga1100[idx] + c) +
b * np.log(pga1100[idx] + c * (arg ** n)))
idx = sites.vs30 >= vlin
site_resp_term[idx] = (a10 + b * n) * np.log(vs30_star[idx] / vlin)
return site_resp_term
def _compute_hanging_wall_term(self, C, dists, rup):
"""
Compute and return hanging wall model term, that is the sixth term in
equation 1, page 74. The calculation of this term is explained in
paragraph 'Hanging-Wall Model', page 77.
"""
if rup.dip == 90.0:
return np.zeros_like(dists.rx)
else:
idx = dists.rx > 0
Fhw = np.zeros_like(dists.rx)
Fhw[idx] = 1
# equation 8, page 77
T1 = np.zeros_like(dists.rx)
idx1 = (dists.rjb < 30.0) & (idx)
T1[idx1] = 1.0 - dists.rjb[idx1] / 30.0
# equation 9, page 77
T2 = np.ones_like(dists.rx)
idx2 = ((dists.rx <= rup.width * np.cos(np.radians(rup.dip))) &
(idx))
T2[idx2] = (0.5 + dists.rx[idx2] /
(2 * rup.width * np.cos(np.radians(rup.dip))))
# equation 10, page 78
T3 = np.ones_like(dists.rx)
idx3 = (dists.rx < rup.ztor) & (idx)
T3[idx3] = dists.rx[idx3] / rup.ztor
# equation 11, page 78
if rup.mag <= 6.0:
T4 = 0.0
elif rup.mag > 6 and rup.mag < 7:
T4 = rup.mag - 6
else:
T4 = 1.0
# equation 5, in AS08_NGA_errata.pdf
if rup.dip >= 30:
T5 = 1.0 - (rup.dip - 30.0) / 60.0
else:
T5 = 1.0
return Fhw * C['a14'] * T1 * T2 * T3 * T4 * T5
def _compute_top_of_rupture_depth_term(self, C, rup):
"""
Compute and return top of rupture depth term, that is the seventh term
in equation 1, page 74. The calculation of this term is explained in
paragraph 'Depth-to-Top of Rupture Model', page 78.
"""
if rup.ztor >= 10.0:
return C['a16']
else:
return C['a16'] * rup.ztor / 10.0
def _compute_large_distance_term(self, C, dists, rup):
"""
Compute and return large distance model term, that is the 8-th term
in equation 1, page 74. The calculation of this term is explained in
paragraph 'Large Distance Model', page 78.
"""
# equation 15, page 79
if rup.mag < 5.5:
T6 = 1.0
elif rup.mag >= 5.5 and rup.mag <= 6.5:
T6 = 0.5 * (6.5 - rup.mag) + 0.5
else:
T6 = 0.5
# equation 14, page 79
large_distance_term = np.zeros_like(dists.rrup)
idx = dists.rrup >= 100.0
large_distance_term[idx] = C['a18'] * (dists.rrup[idx] - 100.0) * T6
return large_distance_term
def _compute_soil_depth_term(self, C, imt, z1pt0, vs30):
"""
Compute and return soil depth model term, that is the 9-th term in
equation 1, page 74. The calculation of this term is explained in
paragraph 'Soil Depth Model', page 79.
"""
a21 = self._compute_a21_factor(C, imt, z1pt0, vs30)
a22 = self._compute_a22_factor(imt)
median_z1pt0 = self._compute_median_z1pt0(vs30)
soil_depth_term = a21 * np.log((z1pt0 + self.CONSTS['c2']) /
(median_z1pt0 + self.CONSTS['c2']))
idx = z1pt0 >= 200
soil_depth_term[idx] += a22 * np.log(z1pt0[idx] / 200)
return soil_depth_term
def _compute_imt1100(self, imt, sites, rup, dists):
"""
Compute and return mean imt value for rock conditions
(vs30 = 1100 m/s)
"""
vs30_1100 = np.zeros_like(sites.vs30) + 1100
vs30_star, _ = self._compute_vs30_star_factor(imt, vs30_1100)
C = self.COEFFS[imt]
mean = (self._compute_base_term(C, rup, dists) +
self._compute_faulting_style_term(C, rup) +
self._compute_hanging_wall_term(C, dists, rup) +
self._compute_top_of_rupture_depth_term(C, rup) +
self._compute_large_distance_term(C, dists, rup) +
self._compute_soil_depth_term(C, imt, sites.z1pt0, vs30_1100) +
# this is the site response term in case of vs30=1100
((C['a10'] + C['b'] * self.CONSTS['n']) *
np.log(vs30_star / C['VLIN'])))
return mean
def _get_stddevs(self, C, C_PGA, pga1100, rup, sites, stddev_types):
"""
Return standard deviations as described in paragraph 'Equations for
standard deviation', page 81.
"""
std_intra = self._compute_intra_event_std(C, C_PGA, pga1100, rup.mag,
sites.vs30,
sites.vs30measured)
std_inter = self._compute_inter_event_std(C, C_PGA, pga1100, rup.mag,
sites.vs30)
stddevs = []
for stddev_type in stddev_types:
assert stddev_type in self.DEFINED_FOR_STANDARD_DEVIATION_TYPES
if stddev_type == const.StdDev.TOTAL:
stddevs.append(np.sqrt(std_intra ** 2 + std_inter ** 2))
elif stddev_type == const.StdDev.INTRA_EVENT:
stddevs.append(std_intra)
elif stddev_type == const.StdDev.INTER_EVENT:
stddevs.append(std_inter)
return stddevs
def _compute_intra_event_std(self, C, C_PGA, pga1100, mag, vs30,
vs30measured):
"""
Compute intra event standard deviation (equation 24) as described
in the errata and not in the original paper.
"""
sigma_b = self._compute_sigma_b(C, mag, vs30measured)
sigma_b_pga = self._compute_sigma_b(C_PGA, mag, vs30measured)
delta_amp = self._compute_partial_derivative_site_amp(C, pga1100, vs30)
std_intra = np.sqrt(sigma_b ** 2 + self.CONSTS['sigma_amp'] ** 2 +
(delta_amp ** 2) * (sigma_b_pga ** 2) +
2 * delta_amp * sigma_b * sigma_b_pga * C['rho'])
return std_intra
def _compute_inter_event_std(self, C, C_PGA, pga1100, mag, vs30):
"""
Compute inter event standard deviation, equation 25, page 82.
"""
tau_0 = self._compute_std_0(C['s3'], C['s4'], mag)
tau_b_pga = self._compute_std_0(C_PGA['s3'], C_PGA['s4'], mag)
delta_amp = self._compute_partial_derivative_site_amp(C, pga1100, vs30)
std_inter = np.sqrt(tau_0 ** 2 + (delta_amp ** 2) * (tau_b_pga ** 2) +
2 * delta_amp * tau_0 * tau_b_pga * C['rho'])
return std_inter
def _compute_sigma_b(self, C, mag, vs30measured):
"""
Equation 23, page 81.
"""
sigma_0 = self._compute_sigma_0(C, mag, vs30measured)
sigma_amp = self.CONSTS['sigma_amp']
return np.sqrt(sigma_0 ** 2 - sigma_amp ** 2)
def _compute_sigma_0(self, C, mag, vs30measured):
"""
Equation 27, page 82.
"""
s1 = np.zeros_like(vs30measured, dtype=float)
s2 = np.zeros_like(vs30measured, dtype=float)
idx = vs30measured == 1
s1[idx] = C['s1mea']
s2[idx] = C['s2mea']
idx = vs30measured == 0
s1[idx] = C['s1est']
s2[idx] = C['s2est']
return self._compute_std_0(s1, s2, mag)
def _compute_std_0(self, c1, c2, mag):
"""
Common part of equations 27 and 28, pag 82.
"""
if mag < 5:
return c1
elif mag >= 5 and mag <= 7:
return c1 + (c2 - c1) * (mag - 5) / 2
else:
return c2
def _compute_partial_derivative_site_amp(self, C, pga1100, vs30):
"""
Partial derivative of site amplification term with respect to
PGA on rock (equation 26), as described in the errata and not
in the original paper.
"""
delta_amp = np.zeros_like(vs30)
vlin = C['VLIN']
c = self.CONSTS['c']
b = C['b']
n = self.CONSTS['n']
idx = vs30 < vlin
delta_amp[idx] = (- b * pga1100[idx] / (pga1100[idx] + c) +
b * pga1100[idx] / (pga1100[idx] + c *
((vs30[idx] / vlin) ** n)))
return delta_amp
def _compute_a21_factor(self, C, imt, z1pt0, vs30):
"""
Compute and return a21 factor, equation 18, page 80.
"""
e2 = self._compute_e2_factor(imt, vs30)
a21 = e2.copy()
vs30_star, v1 = self._compute_vs30_star_factor(imt, vs30)
median_z1pt0 = self._compute_median_z1pt0(vs30)
numerator = ((C['a10'] + C['b'] * self.CONSTS['n']) *
np.log(vs30_star / np.min([v1, 1000])))
denominator = np.log((z1pt0 + self.CONSTS['c2']) /
(median_z1pt0 + self.CONSTS['c2']))
idx = numerator + e2 * denominator < 0
a21[idx] = - numerator[idx] / denominator[idx]
idx = vs30 >= 1000
a21[idx] = 0.0
return a21
def _compute_vs30_star_factor(self, imt, vs30):
"""
Compute and return vs30 star factor, equation 5, page 77.
"""
v1 = self._compute_v1_factor(imt)
vs30_star = vs30.copy()
vs30_star[vs30_star >= v1] = v1
return vs30_star, v1
def _compute_v1_factor(self, imt):
"""
Compute and return v1 factor, equation 6, page 77.
"""
if isinstance(imt, SA):
t = imt.period
if t <= 0.50:
v1 = 1500.0
elif t > 0.50 and t <= 1.0:
v1 = np.exp(8.0 - 0.795 * np.log(t / 0.21))
elif t > 1.0 and t < 2.0:
v1 = np.exp(6.76 - 0.297 * np.log(t))
else:
v1 = 700.0
elif isinstance(imt, PGA):
v1 = 1500.0
else:
# this is for PGV
v1 = 862.0
return v1
def _compute_e2_factor(self, imt, vs30):
"""
Compute and return e2 factor, equation 19, page 80.
"""
e2 = np.zeros_like(vs30)
if isinstance(imt, PGV):
period = 1
elif isinstance(imt, PGA):
period = 0
else:
period = imt.period
if period < 0.35:
return e2
else:
idx = vs30 <= 1000
if period >= 0.35 and period <= 2.0:
e2[idx] = (-0.25 * np.log(vs30[idx] / 1000) *
np.log(period / 0.35))
elif period > 2.0:
e2[idx] = (-0.25 * np.log(vs30[idx] / 1000) *
np.log(2.0 / 0.35))
return e2
def _compute_median_z1pt0(self, vs30):
"""
Compute and return median z1pt0 (in m), equation 17, pqge 79.
"""
z1pt0_median = np.zeros_like(vs30) + 6.745
idx = np.where((vs30 >= 180.0) & (vs30 <= 500.0))
z1pt0_median[idx] = 6.745 - 1.35 * np.log(vs30[idx] / 180.0)
idx = vs30 > 500.0
z1pt0_median[idx] = 5.394 - 4.48 * np.log(vs30[idx] / 500.0)
return np.exp(z1pt0_median)
def _compute_a22_factor(self, imt):
"""
Compute and return the a22 factor, equation 20, page 80.
"""
if isinstance(imt, PGA) or isinstance(imt, PGV):
return 0
elif isinstance(imt, SA):
period = imt.period
if period < 2.0:
return 0.0
else:
return 0.0625 * (period - 2.0)
#: Coefficient tables obtained by joining table 5a page 84, and table 5b
#: page 85.
COEFFS = CoeffsTable(sa_damping=5, table="""\
IMT VLIN b a1 a2 a8 a10 a12 a13 a14 a15 a16 a18 s1est s2est s1mea s2mea s3 s4 rho
pga 865.1 -1.186 0.804 -0.9679 -0.0372 0.9445 0.0000 -0.0600 1.0800 -0.3500 0.9000 -0.0067 0.590 0.470 0.576 0.453 0.470 0.300 1.000
0.010 865.1 -1.186 0.811 -0.9679 -0.0372 0.9445 0.0000 -0.0600 1.0800 -0.3500 0.9000 -0.0067 0.590 0.470 0.576 0.453 0.420 0.300 1.000
0.020 865.1 -1.219 0.855 -0.9774 -0.0372 0.9834 0.0000 -0.0600 1.0800 -0.3500 0.9000 -0.0067 0.590 0.470 0.576 0.453 0.420 0.300 1.000
0.030 907.8 -1.273 0.962 -1.0024 -0.0372 1.0471 0.0000 -0.0600 1.1331 -0.3500 0.9000 -0.0067 0.605 0.478 0.591 0.461 0.462 0.305 0.991
0.040 994.5 -1.308 1.037 -1.0289 -0.0315 1.0884 0.0000 -0.0600 1.1708 -0.3500 0.9000 -0.0067 0.615 0.483 0.602 0.466 0.492 0.309 0.982
0.050 1053.5 -1.346 1.133 -1.0508 -0.0271 1.1333 0.0000 -0.0600 1.2000 -0.3500 0.9000 -0.0076 0.623 0.488 0.610 0.471 0.515 0.312 0.973
0.075 1085.7 -1.471 1.375 -1.0810 -0.0191 1.2808 0.0000 -0.0600 1.2000 -0.3500 0.9000 -0.0093 0.630 0.495 0.617 0.479 0.550 0.317 0.952
0.100 1032.5 -1.624 1.563 -1.0833 -0.0166 1.4613 0.0000 -0.0600 1.2000 -0.3500 0.9000 -0.0093 0.630 0.501 0.617 0.485 0.550 0.321 0.929
0.150 877.6 -1.931 1.716 -1.0357 -0.0254 1.8071 0.0181 -0.0600 1.1683 -0.3500 0.9000 -0.0093 0.630 0.509 0.616 0.491 0.550 0.326 0.896
0.200 748.2 -2.188 1.687 -0.9700 -0.0396 2.0773 0.0309 -0.0600 1.1274 -0.3500 0.9000 -0.0083 0.630 0.514 0.614 0.495 0.520 0.329 0.874
0.250 654.3 -2.381 1.646 -0.9202 -0.0539 2.2794 0.0409 -0.0600 1.0956 -0.3500 0.9000 -0.0069 0.630 0.518 0.612 0.497 0.497 0.332 0.856
0.300 587.1 -2.518 1.601 -0.8974 -0.0656 2.4201 0.0491 -0.0600 1.0697 -0.3500 0.9000 -0.0057 0.630 0.522 0.611 0.499 0.479 0.335 0.841
0.400 503.0 -2.657 1.511 -0.8677 -0.0807 2.5510 0.0619 -0.0600 1.0288 -0.3500 0.8423 -0.0039 0.630 0.527 0.608 0.501 0.449 0.338 0.818
0.500 456.6 -2.669 1.397 -0.8475 -0.0924 2.5395 0.0719 -0.0600 0.9971 -0.3191 0.7458 -0.0025 0.630 0.532 0.606 0.504 0.426 0.341 0.783
0.750 410.5 -2.401 1.137 -0.8206 -0.1137 2.1493 0.0800 -0.0600 0.9395 -0.2629 0.5704 0.0000 0.630 0.539 0.602 0.506 0.385 0.346 0.680
1.000 400.0 -1.955 0.915 -0.8088 -0.1289 1.5705 0.0800 -0.0600 0.8985 -0.2230 0.4460 0.0000 0.630 0.545 0.594 0.503 0.350 0.350 0.607
1.500 400.0 -1.025 0.510 -0.7995 -0.1534 0.3991 0.0800 -0.0600 0.8409 -0.1668 0.2707 0.0000 0.615 0.552 0.566 0.497 0.350 0.350 0.504
2.000 400.0 -0.299 0.192 -0.7960 -0.1708 -0.6072 0.0800 -0.0600 0.8000 -0.1270 0.1463 0.0000 0.604 0.558 0.544 0.491 0.350 0.350 0.431
3.000 400.0 0.000 -0.280 -0.7960 -0.1954 -0.9600 0.0800 -0.0600 0.4793 -0.0708 -0.0291 0.0000 0.589 0.565 0.527 0.500 0.350 0.350 0.328
4.000 400.0 0.000 -0.639 -0.7960 -0.2128 -0.9600 0.0800 -0.0600 0.2518 -0.0309 -0.1535 0.0000 0.578 0.570 0.515 0.505 0.350 0.350 0.255
5.000 400.0 0.000 -0.936 -0.7960 -0.2263 -0.9208 0.0800 -0.0600 0.0754 0.0000 -0.2500 0.0000 0.570 0.587 0.510 0.529 0.350 0.350 0.200
7.500 400.0 0.000 -1.527 -0.7960 -0.2509 -0.7700 0.0800 -0.0600 0.0000 0.0000 -0.2500 0.0000 0.611 0.618 0.572 0.579 0.350 0.350 0.200
10.00 400.0 0.000 -1.993 -0.7960 -0.2683 -0.6630 0.0800 -0.0600 0.0000 0.0000 -0.2500 0.0000 0.640 0.640 0.612 0.612 0.350 0.350 0.200
pgv 400.0 -1.955 5.7578 -0.9046 -0.1200 1.5390 0.0800 -0.0600 0.7000 -0.3900 0.6300 0.0000 0.590 0.470 0.576 0.453 0.420 0.300 0.740
""")
#: equation constants (that are IMT independent)
CONSTS = {
# coefficients in table 4, page 84
'c1': 6.75,
'c4': 4.5,
'a3': 0.265,
'a4': -0.231,
'a5': -0.398,
'n': 1.18,
'c': 1.88,
'c2': 50,
'sigma_amp': 0.3
}