# -*- coding: utf-8 -*-
# vim: tabstop=4 shiftwidth=4 softtabstop=4
#
# Copyright (C) 2014-2017 GEM Foundation
#
# OpenQuake is free software: you can redistribute it and/or modify it
# under the terms of the GNU Affero General Public License as published
# by the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# OpenQuake is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU Affero General Public License for more details.
#
# You should have received a copy of the GNU Affero General Public License
# along with OpenQuake. If not, see <http://www.gnu.org/licenses/>.
"""
Module exports :class:`BindiEtAl2011`.
"""
from __future__ import division
import numpy as np
from scipy.constants import g
from openquake.hazardlib.gsim.base import GMPE, CoeffsTable
from openquake.hazardlib import const
from openquake.hazardlib.imt import PGA, PGV, SA
[docs]class BindiEtAl2011(GMPE):
"""
Implements GMPE developed by D.Bindi, F.Pacor, L.Luzi, R.Puglia,
M.Massa, G. Ameri, R. Paolucci and published as "Ground motion
prediction equations derived from the Italian strong motion data",
Bull Earthquake Eng, DOI 10.1007/s10518-011-9313-z.
SA are given up to 2 s.
The regressions are developed considering the geometrical mean of the
as-recorded horizontal components
"""
#: Supported tectonic region type is 'active shallow crust' because the
#: equations have been derived from data from Italian database ITACA, as
#: explained in the 'Introduction'.
DEFINED_FOR_TECTONIC_REGION_TYPE = const.TRT.ACTIVE_SHALLOW_CRUST
#: Set of :mod:`intensity measure types <openquake.hazardlib.imt>`
#: this GSIM can calculate. A set should contain classes from module
#: :mod:`openquake.hazardlib.imt`.
DEFINED_FOR_INTENSITY_MEASURE_TYPES = set([
PGA,
PGV,
SA
])
#: Supported intensity measure component is the geometric mean of two
#: horizontal components
DEFINED_FOR_INTENSITY_MEASURE_COMPONENT = const.IMC.AVERAGE_HORIZONTAL
#: Supported standard deviation types are inter-event, intra-event
#: and total, page 1904
DEFINED_FOR_STANDARD_DEVIATION_TYPES = set([
const.StdDev.TOTAL,
const.StdDev.INTER_EVENT,
const.StdDev.INTRA_EVENT
])
#: Required site parameter is only Vs30
REQUIRES_SITES_PARAMETERS = set(('vs30', ))
#: Required rupture parameters are magnitude and rake (eq. 1).
REQUIRES_RUPTURE_PARAMETERS = set(('rake', 'mag'))
#: Required distance measure is RRup (eq. 1).
REQUIRES_DISTANCES = set(('rjb', ))
[docs] def get_mean_and_stddevs(self, sites, rup, dists, imt, stddev_types):
"""
See :meth:`superclass method
<.base.GroundShakingIntensityModel.get_mean_and_stddevs>`
for spec of input and result values.
"""
# extracting dictionary of coefficients specific to required
# intensity measure type.
C = self.COEFFS[imt]
imean = (self._compute_magnitude(rup, C) +
self._compute_distance(rup, dists, C) +
self._get_site_amplification(sites, C) +
self._get_mechanism(rup, C))
istddevs = self._get_stddevs(C,
stddev_types,
num_sites=len(sites.vs30))
# Convert units to g,
# but only for PGA and SA (not PGV):
if isinstance(imt, (PGA, SA)):
mean = np.log((10.0 ** (imean - 2.0)) / g)
else:
# PGV:
mean = np.log(10.0 ** imean)
# Return stddevs in terms of natural log scaling
stddevs = np.log(10.0 ** np.array(istddevs))
#mean_LogNaturale = np.log((10 ** mean) * 1e-2 / g)
return mean, stddevs
def _get_stddevs(self, C, stddev_types, num_sites):
"""
Return standard deviations as defined in table 1.
"""
stddevs = []
for stddev_type in stddev_types:
assert stddev_type in self.DEFINED_FOR_STANDARD_DEVIATION_TYPES
if stddev_type == const.StdDev.TOTAL:
stddevs.append(C['SigmaTot'] + np.zeros(num_sites))
elif stddev_type == const.StdDev.INTRA_EVENT:
stddevs.append(C['SigmaW'] + np.zeros(num_sites))
elif stddev_type == const.StdDev.INTER_EVENT:
stddevs.append(C['SigmaB'] + np.zeros(num_sites))
return stddevs
def _compute_distance(self, rup, dists, C):
"""
Compute the second term of the equation 1 described on paragraph 3:
``c1 + c2 * (M-Mref) * log(sqrt(Rjb ** 2 + h ** 2)/Rref) -
c3*(sqrt(Rjb ** 2 + h ** 2)-Rref)``
"""
mref = 5.0
rref = 1.0
rval = np.sqrt(dists.rjb ** 2 + C['h'] ** 2)
return (C['c1'] + C['c2'] * (rup.mag - mref)) *\
np.log10(rval / rref) - C['c3'] * (rval - rref)
def _compute_magnitude(self, rup, C):
"""
Compute the third term of the equation 1:
e1 + b1 * (M-Mh) + b2 * (M-Mh)**2 for M<=Mh
e1 + b3 * (M-Mh) otherwise
"""
m_h = 6.75
b_3 = 0.0
if rup.mag <= m_h:
return C["e1"] + (C['b1'] * (rup.mag - m_h)) +\
(C['b2'] * (rup.mag - m_h) ** 2)
else:
return C["e1"] + (b_3 * (rup.mag - m_h))
def _get_site_amplification(self, sites, C):
"""
Compute the fourth term of the equation 1 described on paragraph :
The functional form Fs in Eq. (1) represents the site amplification and
it is given by FS = sj Cj , for j = 1,...,5, where sj are the
coefficients to be determined through the regression analysis,
while Cj are dummy variables used to denote the five different EC8
site classes
"""
ssa, ssb, ssc, ssd, sse = self._get_site_type_dummy_variables(sites)
return (C['sA'] * ssa) + (C['sB'] * ssb) + (C['sC'] * ssc) + \
(C['sD'] * ssd) + (C['sE'] * sse)
def _get_site_type_dummy_variables(self, sites):
"""
Get site type dummy variables, five different EC8 site classes
he recording sites are classified into 5 classes,
based on the shear wave velocity intervals in the uppermost 30 m, Vs30,
according to the EC8 (CEN 2003):
class A: Vs30 > 800 m/s
class B: Vs30 = 360 − 800 m/s
class C: Vs30 = 180 - 360 m/s
class D: Vs30 < 180 m/s
class E: 5 to 20 m of C- or D-type alluvium underlain by
stiffer material with Vs30 > 800 m/s.
"""
ssa = np.zeros(len(sites.vs30))
ssb = np.zeros(len(sites.vs30))
ssc = np.zeros(len(sites.vs30))
ssd = np.zeros(len(sites.vs30))
sse = np.zeros(len(sites.vs30))
# Class E Vs30 = 0 m/s. We fixed this value to define class E
idx = (np.fabs(sites.vs30) < 1E-10)
sse[idx] = 1.0
# Class D; Vs30 < 180 m/s.
idx = (sites.vs30 >= 1E-10) & (sites.vs30 < 180.0)
ssd[idx] = 1.0
# SClass C; 180 m/s <= Vs30 <= 360 m/s.
idx = (sites.vs30 >= 180.0) & (sites.vs30 < 360.0)
ssc[idx] = 1.0
# Class B; 360 m/s <= Vs30 <= 800 m/s.
idx = (sites.vs30 >= 360.0) & (sites.vs30 < 800)
ssb[idx] = 1.0
# Class A; Vs30 > 800 m/s.
idx = (sites.vs30 >= 800.0)
ssa[idx] = 1.0
return ssa, ssb, ssc, ssd, sse
def _get_mechanism(self, rup, C):
"""
Compute the fifth term of the equation 1 described on paragraph :
Get fault type dummy variables, see Table 1
"""
U, SS, NS, RS = self._get_fault_type_dummy_variables(rup)
return C['f1'] * NS + C['f2'] * RS + C['f3'] * SS
def _get_fault_type_dummy_variables(self, rup):
"""
Fault type (Strike-slip, Normal, Thrust/reverse) is
derived from rake angle.
Rakes angles within 30 of horizontal are strike-slip,
angles from 30 to 150 are reverse, and angles from
-30 to -150 are normal.
Note that the 'Unspecified' case is not considered,
because rake is always given.
"""
U, SS, NS, RS = 0, 0, 0, 0
if np.abs(rup.rake) <= 30.0 or (180.0 - np.abs(rup.rake)) <= 30.0:
# strike-slip
SS = 1
elif rup.rake > 30.0 and rup.rake < 150.0:
# reverse
RS = 1
else:
# normal
NS = 1
return U, SS, NS, RS
#: Coefficients from SA from Table 1
#: Coefficients from PGA e PGV from Table 5
COEFFS = CoeffsTable(sa_damping=5, table="""
IMT e1 c1 c2 h c3 b1 b2 sA sB sC sD sE f1 f2 f3 f4 SigmaB SigmaW SigmaTot
pgv 2.305 -1.5170 0.3260 7.879 0.000000 0.2360 -0.00686 0.0 0.2050 0.269 0.321 0.428 -0.0308 0.0754 -0.0446 0.0 0.194 0.270 0.332
pga 3.672 -1.9400 0.4130 10.322 0.000134 -0.2620 -0.07070 0.0 0.1620 0.240 0.105 0.570 -0.0503 0.1050 -0.0544 0.0 0.172 0.290 0.337
0.04 3.725 -1.9760 0.4220 9.445 0.000270 -0.3150 -0.07870 0.0 0.1610 0.240 0.060 0.614 -0.0442 0.1060 -0.0615 0.0 0.154 0.307 0.343
0.07 3.906 -2.0500 0.4460 9.810 0.000758 -0.3750 -0.07730 0.0 0.1540 0.235 0.057 0.536 -0.0454 0.1030 -0.0576 0.0 0.152 0.324 0.358
0.10 3.796 -1.7940 0.4150 9.500 0.002550 -0.2900 -0.06510 0.0 0.1780 0.247 0.037 0.599 -0.0656 0.1110 -0.0451 0.0 0.154 0.328 0.363
0.15 3.799 -1.5210 0.3200 9.163 0.003720 -0.0987 -0.05740 0.0 0.1740 0.240 0.148 0.740 -0.0755 0.1230 -0.0477 0.0 0.179 0.318 0.365
0.20 3.750 -1.3790 0.2800 8.502 0.003840 0.0094 -0.05170 0.0 0.1560 0.234 0.115 0.556 -0.0733 0.1060 -0.0328 0.0 0.209 0.320 0.382
0.25 3.699 -1.3400 0.2540 7.912 0.003260 0.0860 -0.04570 0.0 0.1820 0.245 0.154 0.414 -0.0568 0.1100 -0.0534 0.0 0.212 0.308 0.374
0.30 3.753 -1.4140 0.2550 8.215 0.002190 0.1240 -0.04350 0.0 0.2010 0.244 0.213 0.301 -0.0564 0.0877 -0.0313 0.0 0.218 0.290 0.363
0.35 3.600 -1.3200 0.2530 7.507 0.002320 0.1540 -0.04370 0.0 0.2200 0.257 0.243 0.235 -0.0523 0.0905 -0.0382 0.0 0.221 0.283 0.359
0.40 3.549 -1.2620 0.2330 6.760 0.002190 0.2250 -0.04060 0.0 0.2290 0.255 0.226 0.202 -0.0565 0.0927 -0.0363 0.0 0.210 0.279 0.349
0.45 3.550 -1.2610 0.2230 6.775 0.001760 0.2920 -0.03060 0.0 0.2260 0.271 0.237 0.181 -0.0597 0.0886 -0.0289 0.0 0.204 0.284 0.350
0.50 3.526 -1.1810 0.1840 5.992 0.001860 0.3840 -0.02500 0.0 0.2180 0.280 0.263 0.168 -0.0599 0.0850 -0.0252 0.0 0.203 0.283 0.349
0.60 3.561 -1.2300 0.1780 6.382 0.001140 0.4360 -0.02270 0.0 0.2190 0.296 0.355 0.142 -0.0559 0.0790 -0.0231 0.0 0.203 0.283 0.348
0.70 3.485 -1.1720 0.1540 5.574 0.000942 0.5290 -0.01850 0.0 0.2100 0.303 0.496 0.134 -0.0461 0.0896 -0.0435 0.0 0.212 0.283 0.354
0.80 3.325 -1.1150 0.1630 4.998 0.000909 0.5450 -0.02150 0.0 0.2100 0.304 0.621 0.150 -0.0457 0.0795 -0.0338 0.0 0.213 0.284 0.355
0.90 3.318 -1.1370 0.1540 5.231 0.000483 0.5630 -0.02630 0.0 0.2120 0.315 0.680 0.154 -0.0351 0.0715 -0.0364 0.0 0.214 0.286 0.357
1.00 3.264 -1.1140 0.1400 5.002 0.000254 0.5990 -0.02700 0.0 0.2210 0.332 0.707 0.152 -0.0298 0.0660 -0.0362 0.0 0.222 0.283 0.360
1.25 2.896 -0.9860 0.1730 4.340 0.000783 0.5790 -0.03360 0.0 0.2440 0.365 0.717 0.183 -0.0207 0.0614 -0.0407 0.0 0.227 0.290 0.368
1.50 2.675 -0.9600 0.1920 4.117 0.000802 0.5750 -0.03530 0.0 0.2510 0.375 0.667 0.203 -0.0140 0.0505 -0.0365 0.0 0.218 0.303 0.373
1.75 2.584 -1.0060 0.2050 4.505 0.000427 0.5740 -0.03710 0.0 0.2520 0.357 0.593 0.220 0.00154 0.0370 -0.0385 0.0 0.219 0.305 0.376
2.00 2.537 -1.0090 0.1930 4.373 0.000164 0.5970 -0.03670 0.0 0.2450 0.352 0.540 0.226 0.00512 0.0350 -0.0401 0.0 0.211 0.308 0.373
""")