Cauzzi and Faccioli 2008 - Switzerland¶
- 
class openquake.hazardlib.gsim.cauzzi_faccioli_2008_swiss.CauzziFaccioli2008SWISS01[source]¶
- This class extends - openquake.hazardlib.gsim.cauzzi_faccioli_2008.CauzziFaccioli2008adjusted to be used for the Swiss Hazard Model [2014]. This GMPE is valid for a fixed value of vs30=700m/s- #. kappa value K-adjustments corresponding to model 01 - as prepared by Ben Edwards K-value for PGA were not provided but infered from SA[0.01s] the model considers a fixed value of vs30=700 to match the reference vs30=1100m/s - small-magnitude correction
- single station sigma - inter-event magnitude/distance adjustment
 - Disclaimer: these equations are modified to be used for the Swiss Seismic Hazard Model [2014]. - The use of these models is the soly responsability of the hazard modeler. - Model implemented by laurentiu.danciu@gmail.com - 
COEFFS= <openquake.hazardlib.gsim.base.CoeffsTable object>¶
- Coefficient table 
 - 
DEFINED_FOR_INTENSITY_MEASURE_TYPES= set([<class 'openquake.hazardlib.imt.SA'>, <class 'openquake.hazardlib.imt.PGA'>])¶
- Supported intensity measure types are spectral acceleration, peak ground acceleration and peak ground velocity. The original paper provides coefficients for PGA and PGV, while SA is obtained from displacement response spectrum values. 
 - 
DEFINED_FOR_STANDARD_DEVIATION_TYPES= set(['Total'])¶
- Supported standard deviation type is only total 
 - 
get_mean_and_stddevs(sites, rup, dists, imt, stddev_types)[source]¶
- See - superclass methodfor spec of input and result values.
 
- 
class openquake.hazardlib.gsim.cauzzi_faccioli_2008_swiss.CauzziFaccioli2008SWISS04[source]¶
- This class extends - openquake.hazardlib.gsim.cauzzi_faccioli_2008.CauzziFaccioli2008, following same strategy as for- openquake.hazardlib.gsim.cauzzi_faccioli_2008_swiss.CauzziFaccioli2008SWISS01
- 
class openquake.hazardlib.gsim.cauzzi_faccioli_2008_swiss.CauzziFaccioli2008SWISS08[source]¶
- This class extends - openquake.hazardlib.gsim.cauzzi_faccioli_2008.CauzziFaccioli2008, following same strategy as for- openquake.hazardlib.gsim.cauzzi_faccioli_2008_swiss.CauzziFaccioli2008SWISS01