Frankel et al. 1996

class openquake.hazardlib.gsim.frankel_1996.FrankelEtAl1996MblgAB1987NSHMP2008[source]

Implements GMPE developed by Arthur Frankel et al. and documented in “National Seismic-Hazard Maps: Documentation June 1996” (USGS - Open File Report 96-532) available at: http://earthquake.usgs.gov/hazards/products/conterminous/1996/documentation/ofr96-532.pdf

The GMPE is used by the National Seismic Hazard Mapping Project (NSHMP) for the 2008 central and eastern US hazard model.

This class replicates the algorithm as implemented in subroutine getFEA in the hazgridXnga2.f Fortran code available at: http://earthquake.usgs.gov/hazards/products/conterminous/2008/software/

The GMPE is defined by a set of lookup tables (see Appendix A) defined from minimum magnitude Mw=4.4 to maximum magnitude Mw=8.2, and from (hypocentral) distance 10 km to 1000 km. Values outside these range are clipped.

Lookup tables are defined for PGA, and SA at the following periods: 0.1, 0.2, 0.3, 0.5, 1.0, 2.0. The GMPE does not allow for interpolation on unsupported periods.

The class assumes rupture magnitude to be in Mblg scale (given that MFDs for central and eastern US are given in this scale). However lookup tables are defined for Mw. Therefore Mblg is converted to Mw by using Atkinson and Boore 1987 conversion equation.

Coefficients are given for the B/C site conditions.

DEFINED_FOR_INTENSITY_MEASURE_COMPONENT = 'Average horizontal'

Supported intensity measure component is the geometric mean of attr:~openquake.hazardlib.const.IMC.AVERAGE_HORIZONTAL,

DEFINED_FOR_INTENSITY_MEASURE_TYPES = set([<class 'openquake.hazardlib.imt.SA'>, <class 'openquake.hazardlib.imt.PGA'>])

Supported intensity measure types are spectral acceleration, and peak ground acceleration

DEFINED_FOR_STANDARD_DEVIATION_TYPES = set(['Total'])

Supported standard deviation type is only total.

DEFINED_FOR_TECTONIC_REGION_TYPE = 'Stable Shallow Crust'

Supported tectonic region type is stable continental crust, given that the equations have been derived for central and eastern north America

REQUIRES_DISTANCES = set(['rhypo'])

Required distance measure is rhypo

REQUIRES_RUPTURE_PARAMETERS = set(['mag'])

Required rupture parameter is only magnitude (Mblg).

REQUIRES_SITES_PARAMETERS = set([])

No site parameters required

get_mean_and_stddevs(sites, rup, dists, imt, stddev_types)[source]

See superclass method for spec of input and result values.

Raises:ValueError – if imt is instance of openquake.hazardlib.imt.SA with unsupported period.
class openquake.hazardlib.gsim.frankel_1996.FrankelEtAl1996MblgJ1996NSHMP2008[source]

Extend FrankelEtAl1996MblgAB1987NSHMP2008 but uses Johnston 1996 equation for converting from Mblg to Mw.

class openquake.hazardlib.gsim.frankel_1996.FrankelEtAl1996MwNSHMP2008[source]

Extend FrankelEtAl1996MblgAB1987NSHMP2008 but assumes magnitude to be in Mw scale and therefore no conversion is applied.