Bindi et al. 2014¶

class
openquake.hazardlib.gsim.bindi_2014.
BindiEtAl2014Rjb
[source]¶ Implements European GMPE: D.Bindi, M. Massa, L.Luzi, G. Ameri, F. Pacor, R.Puglia and P. Augliera (2014), “PanEuropean ground motion prediction equations for the average horizontal component of PGA, PGV and 5 %damped PSA at spectral periods of up to 3.0 s using the RESORCE dataset”, Bulletin of Earthquake Engineering, 12(1), 391  340
The regressions are developed considering the geometrical mean of the asrecorded horizontal components The printed version of the GMPE was corrected by Erratum: D.Bindi, M. Massa, L.Luzi, G. Ameri, F. Pacor, R.Puglia and P. Augliera (2014), “Erratum to PanEuropean ground motion prediction equations for the average horizontal component of PGA, PGV and 5 %damped PSA at spectral periods of up to 3.0 s using the RESORCE dataset”, Bulletin of Earthquake Engineering, 12(1), 431  448. The erratum notes that the printed coefficients tables were in error. In this implementation coefficients tables were taken from the Electronic Supplementary material of the original paper, which are indicated as being unaffected.

COEFFS
= <openquake.hazardlib.gsim.base.CoeffsTable object>¶ Coefficients from Table 2

DEFINED_FOR_INTENSITY_MEASURE_COMPONENT
= 'Average horizontal'¶ Supported intensity measure component is the geometric mean of two horizontal components

DEFINED_FOR_INTENSITY_MEASURE_TYPES
= set([<class 'openquake.hazardlib.imt.PGV'>, <class 'openquake.hazardlib.imt.PGA'>, <class 'openquake.hazardlib.imt.SA'>])¶ Set of
intensity measure types
this GSIM can calculate. A set should contain classes from moduleopenquake.hazardlib.imt
.

DEFINED_FOR_STANDARD_DEVIATION_TYPES
= set(['Total', 'Inter event', 'Intra event'])¶ Supported standard deviation types are interevent, intraevent and total

DEFINED_FOR_TECTONIC_REGION_TYPE
= 'Active Shallow Crust'¶ Supported tectonic region type is ‘active shallow crust’

REQUIRES_DISTANCES
= set(['rjb'])¶ Required distance measure is Rjb (eq. 1).

REQUIRES_RUPTURE_PARAMETERS
= set(['rake', 'mag'])¶ Required rupture parameters are magnitude and rake (eq. 1).

REQUIRES_SITES_PARAMETERS
= set(['vs30'])¶ Required site parameter is only Vs30

get_mean_and_stddevs
(sites, rup, dists, imt, stddev_types)[source]¶ See
superclass method
for spec of input and result values.


class
openquake.hazardlib.gsim.bindi_2014.
BindiEtAl2014RjbEC8
[source]¶ Implements the Bindi et al (2014) GMPE for the case where JoynerBoore distance is specified but Eurocode 8 Site classification is used.

COEFFS
= <openquake.hazardlib.gsim.base.CoeffsTable object>¶ Coefficients from Table 1


class
openquake.hazardlib.gsim.bindi_2014.
BindiEtAl2014RjbEC8NoSOF
[source]¶ Implements the Bindi et al (2014) GMPE for the case in which the site amplification is defined according to the Eurocode 8 classification, but styleoffaulting is neglected

REQUIRES_RUPTURE_PARAMETERS
= set(['mag'])¶ Required rupture parameters are magnitude


class
openquake.hazardlib.gsim.bindi_2014.
BindiEtAl2014Rhyp
[source]¶ Implements the Bindi et al (2014) GMPE for the case in which hypocentral distance is preferred, styleoffaulting is specfieid and for which the site amplification is dependent directly on Vs30

COEFFS
= <openquake.hazardlib.gsim.base.CoeffsTable object>¶ Coefficients from Table 4

REQUIRES_DISTANCES
= set(['rhypo'])¶ Required distance measure is Rhypo (eq. 1).


class
openquake.hazardlib.gsim.bindi_2014.
BindiEtAl2014RhypEC8
[source]¶ Implements the Bindi et al (2014) GMPE for the case in which hypocentral distance is preferred, styleoffaulting is specfied and site amplification is characterised according to the Eurocode 8 site class

COEFFS
= <openquake.hazardlib.gsim.base.CoeffsTable object>¶ Coefficients from Table 3

REQUIRES_DISTANCES
= set(['rhypo'])¶ Required distance measure is Rhypo


class
openquake.hazardlib.gsim.bindi_2014.
BindiEtAl2014RhypEC8NoSOF
[source]¶ Implements the Bindi et al. (2014) GMPE for the case in which hypocentral distance is preferred, Eurocode 8 site amplification is used and styleoffaulting is unspecfied.

REQUIRES_RUPTURE_PARAMETERS
= set(['mag'])¶ Required rupture parameters are magnitude
