Campbell & Bozorgnia 2014

class openquake.hazardlib.gsim.campbell_bozorgnia_2014.CampbellBozorgnia2014[source]

Implements NGA-West 2 GMPE developed by Kenneth W. Campbell and Yousef Bozorgnia, published as “NGA-West2 Ground Motion Model for the Average Horizontal Components of PGA, PGV, and 5 % Damped Linear Acceleration Response Spectra” (2014, Earthquake Spectra, Volume 30, Number 3, pages 1087 - 1115).

DEFINED_FOR_INTENSITY_MEASURE_COMPONENT = 'Average Horizontal (RotD50)'

Supported intensity measure component is orientation-independent average horizontal GMRotI50

DEFINED_FOR_INTENSITY_MEASURE_TYPES = set([<class 'openquake.hazardlib.imt.PGA'>, <class 'openquake.hazardlib.imt.SA'>, <class 'openquake.hazardlib.imt.PGV'>])

Supported intensity measure types are spectral acceleration, peak ground velocity and peak ground acceleration

DEFINED_FOR_STANDARD_DEVIATION_TYPES = set(['Total', 'Inter event', 'Intra event'])

Supported standard deviation types are inter-event, intra-event and total, see section “Aleatory Variability Model”, page 1094.

DEFINED_FOR_TECTONIC_REGION_TYPE = 'Active Shallow Crust'

Supported tectonic region type is active shallow crust

REQUIRES_DISTANCES = set(['rx', 'rjb', 'rrup'])

Required distance measures are Rrup, Rjb and Rx

REQUIRES_RUPTURE_PARAMETERS = set(['hypo_depth', 'rake', 'width', 'ztor', 'mag', 'dip'])

Required rupture parameters are magnitude, rake, dip, ztor, rupture width and hypocentral depth

REQUIRES_SITES_PARAMETERS = set(['z2pt5', 'vs30'])

Required site parameters are Vs30, Vs30 type (measured or inferred), and depth (km) to the 2.5 km/s shear wave velocity layer (z2pt5)

get_mean_and_stddevs(sites, rup, dists, imt, stddev_types)[source]

See superclass method for spec of input and result values.

get_mean_values(C, sites, rup, dists, a1100)[source]

Returns the mean values for a specific IMT

class openquake.hazardlib.gsim.campbell_bozorgnia_2014.CampbellBozorgnia2014HighQ[source]

Implements the Campbell & Bozorgnia (2014) NGA-West2 GMPE for regions with low attenuation (high quality factor, Q) (i.e. China, Turkey)

class openquake.hazardlib.gsim.campbell_bozorgnia_2014.CampbellBozorgnia2014LowQ[source]

Implements the Campbell & Bozorgnia (2014) NGA-West2 GMPE for regions with high attenuation (low quality factor, Q) (i.e. Japan, Italy)

class openquake.hazardlib.gsim.campbell_bozorgnia_2014.CampbellBozorgnia2014JapanSite[source]

Implements the Campbell & Bozorgnia (2014) NGA-West2 GMPE for the case in which the “Japan” shallow site response term is activited

class openquake.hazardlib.gsim.campbell_bozorgnia_2014.CampbellBozorgnia2014HighQJapanSite[source]

Implements the Campbell & Bozorgnia (2014) NGA-West2 GMPE, for the low attenuation (high quality factor) coefficients, for the case in which the “Japan” shallow site response term is activited

class openquake.hazardlib.gsim.campbell_bozorgnia_2014.CampbellBozorgnia2014LowQJapanSite[source]

Implements the Campbell & Bozorgnia (2014) NGA-West2 GMPE, for the high attenuation (low quality factor) coefficients, for the case in which the “Japan” shallow site response term is activited

Previous topic

Campbell and Bozorgnia 2008

Next topic

Cauzzi, Faccioli, Vanini and Bianchini 2014

This Page