Cauzzi, Faccioli, Vanini and Bianchini 2014¶

class
openquake.hazardlib.gsim.cauzzi_2014.
CauzziEtAl2014
[source]¶ Implements GMPE developed by Carlo Cauzzi et al (2014) and published as C.Cauzzi, E. Faccioli, M. Vanini and A. Bianchini (2014) “Updated predictive equations for broadband (0.0  10.0 s) horizontal response spectra and peak ground motions, based on a global dataset of digital acceleration records”, Bulletin of Earthquake Engineering, In Press
Spectral acceleration (SA) values are obtained from displacement response spectrum (DSR) values (as provided by the original equations) using the following formula
SA = DSR * (2 * π / T) ** 2

COEFFS
= <openquake.hazardlib.gsim.base.CoeffsTable object>¶ Coefficient table constructed from the electronic suplements of the original paper.

DEFINED_FOR_INTENSITY_MEASURE_COMPONENT
= 'Average horizontal'¶ Supported intensity measure component is the geometric mean of two horizontal components
AVERAGE_HORIZONTAL
,

DEFINED_FOR_INTENSITY_MEASURE_TYPES
= set([<class 'openquake.hazardlib.imt.SA'>, <class 'openquake.hazardlib.imt.PGA'>, <class 'openquake.hazardlib.imt.PGV'>])¶ Supported intensity measure types are spectral acceleration, peak ground acceleration and peak ground velocity. The original paper provides coefficients for PGA and PGV, while SA is obtained from displacement response spectrum values. Coefficients for PGA are taken from the SA (0.01 s) spectral acceleration, as indicated in Page 11 (at the time of writing) of Cauzzi et al. (2014)

DEFINED_FOR_STANDARD_DEVIATION_TYPES
= set(['Intra event', 'Inter event', 'Total'])¶ Supported standard deviation types are interevent, intraevent and total

DEFINED_FOR_TECTONIC_REGION_TYPE
= 'Active Shallow Crust'¶ Supported tectonic region type is active shallow crust,

REQUIRES_DISTANCES
= set(['rrup'])¶ Required distance measure is Rrup,

REQUIRES_RUPTURE_PARAMETERS
= set(['rake', 'mag'])¶ Required rupture parameters are magnitude and rake

REQUIRES_SITES_PARAMETERS
= set(['vs30'])¶ Required site parameter is only Vs30

get_mean_and_stddevs
(sites, rup, dists, imt, stddev_types)[source]¶ See
superclass method
for spec of input and result values.


class
openquake.hazardlib.gsim.cauzzi_2014.
CauzziEtAl2014NoSOF
[source]¶ Returns the Cauzzi et al (GMPE) for the case when no styleoffaulting is input. This modifies both the expected ground motion as well as the interevent (and thus total) standard deviations.

REQUIRES_RUPTURE_PARAMETERS
= set(['mag'])¶ Required rupture parameters are magnitude


class
openquake.hazardlib.gsim.cauzzi_2014.
CauzziEtAl2014FixedVs30
[source]¶ Implements the Cauzzi et al (2014) model for the case in which the reference Vs30 in the site amplification term is fixed at 800 m/s

class
openquake.hazardlib.gsim.cauzzi_2014.
CauzziEtAl2014FixedVs30NoSOF
[source]¶ Implements the Cauzzi et al (2014) model for the case in which the reference Vs30 in the site amplification term is fixed at 800 m/s