Bindi et al. 2011

class openquake.hazardlib.gsim.bindi_2011.BindiEtAl2011[source]

Implements GMPE developed by D.Bindi, F.Pacor, L.Luzi, R.Puglia, M.Massa, G. Ameri, R. Paolucci and published as “Ground motion prediction equations derived from the Italian strong motion data”, Bull Earthquake Eng, DOI 10.1007/s10518-011-9313-z. SA are given up to 2 s. The regressions are developed considering the geometrical mean of the as-recorded horizontal components

COEFFS = <openquake.hazardlib.gsim.base.CoeffsTable object at 0x5d69e50>

Coefficients from SA from Table 1 Coefficients from PGA e PGV from Table 5

DEFINED_FOR_INTENSITY_MEASURE_COMPONENT = 'Average horizontal'

Supported intensity measure component is the geometric mean of two horizontal components

DEFINED_FOR_INTENSITY_MEASURE_TYPES = set([<class 'openquake.hazardlib.imt.PGA'>, <class 'openquake.hazardlib.imt.PGV'>, <class 'openquake.hazardlib.imt.SA'>])

Set of intensity measure types this GSIM can calculate. A set should contain classes from module openquake.hazardlib.imt.

DEFINED_FOR_STANDARD_DEVIATION_TYPES = set(['Total', 'Inter event', 'Intra event'])

Supported standard deviation types are inter-event, intra-event and total, page 1904

DEFINED_FOR_TECTONIC_REGION_TYPE = 'Active Shallow Crust'

Supported tectonic region type is ‘active shallow crust’ because the equations have been derived from data from Italian database ITACA, as explained in the ‘Introduction’.

REQUIRES_DISTANCES = set(['rjb'])

Required distance measure is RRup (eq. 1).

REQUIRES_RUPTURE_PARAMETERS = set(['rake', 'mag'])

Required rupture parameters are magnitude and rake (eq. 1).

REQUIRES_SITES_PARAMETERS = set(['vs30'])

Required site parameter is only Vs30

get_mean_and_stddevs(sites, rup, dists, imt, stddev_types)[source]

See superclass method for spec of input and result values.

Previous topic

Berge-Thierry et al. 2003

Next topic

Bindi et al. 2014

This Page